Compact guide cylinder with plain bearings, double-acting, 20 mm bore, 20 mm stroke, magnetic piston - E.MC

With a 20 mm bore and 20 mm stroke, this guide cylinder handles lifting and pushing tasks where the load acts on the side of the end plate. The guide rods run in self-lubricating plain bearings and the end plate accepts up to 78 N of lateral load. The short stroke keeps the installed height low, for example for stoppers and clamps.

Advantages

• Permissible lateral load 78 N and 1.57 Nm torque at the end plate at 20 mm stroke
• Magnetic piston for end position sensing with cylinder switches
• Non-rotating accuracy ±0.09° when retracted, provided by two steel guide rods
• Mounting from the top, from below, at the rear or via the T-slot underneath
• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide

Applications

• Positioning and indexing moves with side-acting loads
• Pressing and clamping small assemblies
• Raising and lowering workpiece carriers at assembly stations

Accessories and spare parts

A repair kit for guide cylinders with a 20 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.