Compact guide cylinder with plain bearings, double-acting, 16 mm bore, 10 mm stroke, magnetic piston - E.MC

This compact guide cylinder with a 16 mm bore and 10 mm stroke lifts, pushes and stops small parts without loading the piston rod sideways. Two guide rods running in plain bearings carry the end plate and hold it within ±0.10° non-rotating accuracy. The short stroke keeps the installed height low, for example for stoppers and clamps.

Advantages

• Permissible lateral load 67 N and 1.21 Nm torque at the end plate at 10 mm stroke
• Non-rotating accuracy ±0.10° when retracted, provided by two steel guide rods
• Air port M5 at the side or from below, the unused one is closed with a plug
• Magnetic piston for end position sensing with cylinder switches

Applications

• Stoppers and separators on small-part transfer conveyors
• Lifting units in pick-and-place modules with small grippers
• Pushing parts out of feeders

Accessories and spare parts

A repair kit for guide cylinders with a 16 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.