5/3-way solenoid valve, pressure centre, M5, 170 l/min, 24 V DC - YPC SF1503

For tight spaces and actuators plumbed in M5, the YPC SF1503 offers a 15 mm wide body and 170 l/min at 5 bar. It pressurises both chambers of a cylinder, which brings it to a stop. In the spring-centred middle position supply pressure is applied to both outlets while the exhaust ports are blocked.

Advantages

• Both outlets pressurised in the centre position, the cylinder is held between two air cushions
• Fast response of 35 ms max. at 5 bar, switching frequency up to 3 Hz
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used
• Non-polarised coil, removable, insulation class F, 2.5 W at 24 V DC
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide

Applications

• Supplying two separate consumers that both need pressure in the rest position
• Stopping cylinders with a through rod, where both chambers have the same area
• Back pressure on both sides so an actuator restarts after a pause without a jump

Accessories and spare parts

A replacement 24 V DC solenoid coil is available separately and can be swapped without touching the pneumatic section. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.