5/3-way solenoid valve, pressure centre, M5, 170 l/min, 24 V AC - YPC SF1503

The YPC SF1503 pressurises both chambers of a cylinder, which brings it to a stop. In the spring-centred middle position supply pressure is applied to both outlets while the exhaust ports are blocked. At 5 bar it passes 170 l/min through its M5 ports from a body only 15 mm wide.

Advantages

• Both outlets pressurised in the centre position, the cylinder is held between two air cushions
• Non-polarised coil, removable, insulation class F, 3.5 VA at 24 V AC
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide
• Fast response of 35 ms max. at 5 bar, switching frequency up to 3 Hz
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used

Applications

• Stopping cylinders with a through rod, where both chambers have the same area
• Back pressure on both sides so an actuator restarts after a pause without a jump
• Supplying two separate consumers that both need pressure in the rest position

Accessories and spare parts

A replacement 24 V AC solenoid coil is available separately and can be swapped without touching the pneumatic section. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.