5/3-way solenoid valve, exhaust centre, M5, 170 l/min, 24 V DC, rectangular LED connector - YPC SF1403

For tight spaces and actuators plumbed in M5, the YPC SF1403 offers a 15 mm wide body and 170 l/min at 5 bar. It depressurises both sides of a cylinder so the piston rod can be moved by hand. In the spring-centred middle position the supply port is blocked and both outlets are open to exhaust.

Advantages

• Both cylinder chambers vented in the centre position, the actuator moves freely
• Fast response of 35 ms max. at 5 bar, switching frequency up to 3 Hz
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used
• Visible switching state: rectangular connector with LED and suppression circuit, 2 W power consumption
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide

Applications

• Compliant contact with a workpiece where the cylinder should only guide
• Set-up mode in which tools or fixtures are pushed by hand
• Releasing an actuator without force after an emergency stop

Accessories and spare parts

A replacement 24 V DC solenoid coil is available separately and can be swapped without touching the pneumatic section. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.