5/3-way solenoid valve, exhaust centre, M5, 170 l/min, 24 V AC - YPC SF1403

For tight spaces and actuators plumbed in M5, the YPC SF1403 offers a 15 mm wide body and 170 l/min at 5 bar. It depressurises both sides of a cylinder so the piston rod can be moved by hand. In the spring-centred middle position the supply port is blocked and both outlets are open to exhaust.

Advantages

• Both cylinder chambers vented in the centre position, the actuator moves freely
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used
• Non-polarised coil, removable, insulation class F, 3.5 VA at 24 V AC
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide
• Fast response of 35 ms max. at 5 bar, switching frequency up to 3 Hz

Applications

• Compliant contact with a workpiece where the cylinder should only guide
• Set-up mode in which tools or fixtures are pushed by hand
• Releasing an actuator without force after an emergency stop

Accessories and spare parts

The matching 24 V AC coil is sold separately as a spare part and changes without opening the valve body. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.