5/3-way solenoid valve, exhaust centre, M5, 170 l/min, 115 V AC - YPC SF1403

The YPC SF1403 depressurises both sides of a cylinder so the piston rod can be moved by hand. In the spring-centred middle position the supply port is blocked and both outlets are open to exhaust. At 5 bar it passes 170 l/min through its M5 ports from a body only 15 mm wide.

Advantages

• Both cylinder chambers vented in the centre position, the actuator moves freely
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide
• Fast response of 35 ms max. at 5 bar, switching frequency up to 3 Hz
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used
• Non-polarised coil, removable, insulation class F, 3.5 VA at 115 V AC

Applications

• Set-up mode in which tools or fixtures are pushed by hand
• Releasing an actuator without force after an emergency stop
• Compliant contact with a workpiece where the cylinder should only guide

Accessories and spare parts

The matching 115 V AC coil is sold separately as a spare part and changes without opening the valve body. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.