5/2-way solenoid valve, double solenoid, M5, 190 l/min, 24 V DC, rectangular LED connector - YPC SF1200

The YPC SF1200 holds a cylinder in its end position without the controller having to keep an output energised. Two solenoids switch alternately. A short pulse is enough, and the spool stays in the last switched position even if the voltage drops. At 5 bar it passes 190 l/min through its M5 ports from a body only 15 mm wide.

Advantages

• Double solenoid with memory: a short pulse switches the valve and the position is retained
• Visible switching state: rectangular connector with LED and suppression circuit, 2 W power consumption
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide
• Fast response of 25 ms max. at 5 bar, switching frequency up to 5 Hz
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used

Applications

• Clamping and holding functions that must keep their position on power failure
• Cylinders with long dwell times in the end position, where a permanently energised coil only adds heat
• Sequenced cycles in which the controller issues short switching pulses only

Accessories and spare parts

A replacement 24 V DC solenoid coil is available separately and can be swapped without touching the pneumatic section. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.