5/2-way solenoid valve, double solenoid, M5, 190 l/min, 115 V AC - YPC SF1200

Two solenoids switch alternately. A short pulse is enough, and the spool stays in the last switched position even if the voltage drops. That is how this 5/2-way valve holds a cylinder in its end position without the controller having to keep an output energised. It passes 190 l/min at 5 bar and switches in 25 ms max.

Advantages

• Double solenoid with memory: a short pulse switches the valve and the position is retained
• Oil-free operation on non-lubricated air, ISO VG32 if lubrication is used
• Non-polarised coil, removable, insulation class F, 3.5 VA at 115 V AC
• Aluminium body and spool, NBR seals, pilot section in glass-fibre reinforced polyamide
• Fast response of 25 ms max. at 5 bar, switching frequency up to 5 Hz

Applications

• Cylinders with long dwell times in the end position, where a permanently energised coil only adds heat
• Sequenced cycles in which the controller issues short switching pulses only
• Clamping and holding functions that must keep their position on power failure

Accessories and spare parts

The matching 115 V AC coil is sold separately as a spare part and changes without opening the valve body. For valve banks, YPC offers SF1000 series manifolds with common supply and exhaust.

According to YPC, the SF1000 series meets CE and RoHS requirements.