Multipole valve terminal, 25-pin D-sub, 4 x 5/2-way single solenoid, M7 top ports, 24 V DC - E.MC

On an 11.5 mm pitch this manifold carries 4 valve positions, all fitted with spring-return 5/2-way valves. The controller connects to the terminal through a single 25-pin D-sub connector instead of wiring each solenoid separately. The M7 ports are located on top of the valves, and supply and common exhaust are connected through G 1/8. At 89 mm overall length the manifold fits into tight enclosures.

Advantages

• One 25-pin D-sub connector for all 4 solenoids, swivelling by 90° for a vertical or horizontal cable exit.
• Response time of 15 ms or less at 5 bar and up to 5 switching cycles per second per valve.
• Only 0.8 W per solenoid at 24 V DC ±10 %, so 4 valves draw 3.2 W in total.
• Service life of at least 40 million cycles, valves with LED status indicator, each replaceable from above.
• M7 ports with a nominal cross-section of 7 mm² (Cv 0.39), around 330 l/min flow per station.

Applications

• Direct connection to the digital output cards of a PLC through a pre-assembled 25-pin cable.
• Small handling and test stations with 4 pneumatic axes in a confined space.
• Medium-bore cylinders that move briskly with 330 l/min per station.
• Cabinet or machine mounting with easily accessible tube connections on top of each valve.

Conversion and extension

The valves can be swapped for individually available valves with one or two solenoids or for blanking plates. Stations are counted from the electrical connection.