S1V series valve terminal, 6 x 5/2-way single solenoid, M5 top ports, 25-pin D-sub multipole - E.MC

Four to six actuators on a single cable: this 6-station terminal suits small fixtures and feeders. Supply and exhaust run centrally through the base, and the M5 working ports are on top of the valves. Each station delivers roughly 230 l/min.

Advantages

• One cable for all 6 stations: 25-pin D-sub connector that swivels through 90° for a vertical or horizontal cable exit
• 11.5 mm pitch: 6 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions
• Service life: at least 40 million cycles, response under 15 ms, no lubrication required
• Easy access: M5 ports right on top of each valve, valves replaced from above

Applications

• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Mounting on a DIN rail close to the control cabinet, linked to the PLC through a ready-made 25-pin cable
• Layouts where tubing exits upwards and every station stays clearly assigned
• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. For multipole control, 25-pin cables come in 1, 2 and 3 m lengths.