S1V series valve terminal, 6 x 5/2-way single solenoid, M5 top ports, IO-Link - E.MC

The 6 stations on this terminal are enough for a small assembly, such as a gripper with its lift unit. The integrated IO-Link module takes switching commands straight from the controller, and every station carries a single-solenoid 5/2-way valve drawing 0.8 W. The M5 working ports are on top of the valves.

Advantages

• IO-Link connection: M12, A-coded, Class B, bus module current below 25 mA
• Easy access: M5 ports right on top of each valve, valves replaced from above
• 11.5 mm pitch: 6 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions
• Service life: at least 40 million cycles, response under 15 ms, no lubrication required

Applications

• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station
• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Decentralised valve manifold mounted on the machine and linked to the controller via IO-Link instead of discrete wiring
• Extending existing equipment through a spare IO-Link master port, with no separate fieldbus line

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. Matching M12 cables are available for the bus line and the power supply.