S1V series valve terminal, 10 x 5/2-way single solenoid, M5 top ports, 25-pin D-sub multipole - E.MC

The terminal combines 10 single-solenoid 5/2-way valves on an aluminium base and is driven through a 25-pin D-sub connector. Supply and exhaust run centrally through the base, and the M5 working ports are on top of the valves. Each station delivers roughly 230 l/min.

Advantages

• One cable for all 10 stations: 25-pin D-sub connector that swivels through 90° for a vertical or horizontal cable exit
• Easy access: M5 ports right on top of each valve, valves replaced from above
• 11.5 mm pitch: 10 valve positions in a small footprint, DIN rail or screw mounting
• Easy to reconfigure: every position takes a single or double solenoid valve, including 5/3 and 2x 3/2 functions
• Service life: at least 40 million cycles, response under 15 ms, no lubrication required

Applications

• Pneumatic grippers, rotary actuators and stoppers in assembly and test fixtures
• Mounting on a DIN rail close to the control cabinet, linked to the PLC through a ready-made 25-pin cable
• Layouts where tubing exits upwards and every station stays clearly assigned
• Driving small double-acting cylinders and compact slides whose air demand is well covered by about 230 l/min per station

Accessories and spare parts

Blanking plates for unused positions, individual valves in other functions, M5 push-in fittings, silencers and mounting screws are available separately. For multipole control, 25-pin cables come in 1, 2 and 3 m lengths.