Solenoid coil type P, 230 V AC, 22 VA, 14.8 mm armature bore, connector size 3 - E.MC

The type P solenoid coil sits on the armature tube of 2/2-way solenoid valves, normally closed, G 1/8 to G 2. At 230 V AC and 22 VA it is rated for continuous operation at 100 % duty cycle. To replace it, the coil is pulled off the armature tube while the valve stays installed.

Advantages

• Armature bore 14.8 mm bottom, 10.2 mm top, 40 mm between armature bores.
• Outer dimensions 30 x 42 x 39 mm, weight 170 g.
• Connector size 3, supplied with connector or cable.
• 100 % duty cycle at 230 V AC, power 22 VA.

Applications

• Spare parts stock for systems with several valves using type P coils.
• Changing a type P valve to another control voltage, provided the valve is offered in that voltage.
• Replacing a faulty or burnt-out coil on 2/2-way solenoid valves, normally closed, G 1/8 to G 2.

Matching valves

Type P coils are available for 12 V DC, 24 V DC, 24 V AC and 230 V AC. They are intended as spare parts for valves whose data sheet specifies coil type P. No warranty is given for use on other valves.