Images are examples, some edited with AI. The technical data are authoritative. AI notice
5/2-way push-pull knob valve for panel mounting, G 1/2, spring return, M 22x1.5 panel thread - E.MC
5/2-way push-pull knob valve for panels up to 6 mm thick, M 22x1.5 mounting thread. G 1/2, 2250 l/min, spring return to the normal position. Works without power or pilot air.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
When a double-acting cylinder has to be switched without any electrics, one move of the push-pull knob does it. The G 1/2 valve flows 2250 l/min through a 8 mm orifice. The M 22x1.5 threaded neck screws straight into the control panel, leaving the knob on the front of the console. The valve stays switched only while the operator holds it. On release, the spring restores the normal position.
Advantages
- Spring return: without actuation the valve always goes back to the same normal position
- Aluminum body and spool, NBR seals, working pressure 0 to 8 bar
- No lubrication required, runs on lubricated or dry air, temperature range -20 to 70 °C
- Panel mounting via M 22x1.5 thread for panels up to 6 mm thick
- 3 supply and working ports G 1/2 plus 2 separate exhaust ports G 1/2, so each cylinder side can be speed-controlled individually
Applications
- Setup mode: the cylinder extends only while actuated and retracts on release
- Hand-operated presses and fixtures with a clearly defined rest position
- Double-acting cylinders that should always return to the same end position
- Control consoles and panels where only the knob protrudes at the front
Technical data
| Design | push-pull knob valve, axially operated, for panel mounting |
|---|---|
| Valve function | 5/2-way |
| Switching behavior | spring return to normal position |
| Actuation | manual, push-pull knob |
| Supply and working ports | 3x G 1/2 |
| Exhaust ports | 2x G 1/2 |
| Orifice | 8 mm |
| Flow rate | 2250 l/min |
| Working pressure | 0 to 8 bar |
| Max. pressure | 12 bar |
| Medium | compressed air, filtered to 40 µm, lubricated or dry |
| Lubrication | not required |
| Temperature range | -20 to 70 °C |
| Body and spool | aluminum |
| Seals | NBR |
| Supply connection | possible at any port |
| Panel thread | M 22x1.5 |
| Max. panel thickness | 6 mm |
| Knob diameter | 22 mm |
| Weight | 480 g |
| Manufacturer | E.MC |
| Hersteller-Nr | L 524-15 S |
| EAN | 4050571460037 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 8 |
| Function | Federrückstellung |
| Flow rate [l/min] | 2250 |
| Gewinde Abluft (2x) | G 1/2 |
| Temperaturbereich | -20-70 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.