Images are examples, some edited with AI. The technical data are authoritative. AI notice
5/2-way push-pull knob valve for panel mounting, G 1/8, detent, M 14x1 panel thread - E.MC
5/2-way push-pull knob valve for panels up to 6 mm thick, M 14x1 mounting thread. G 1/8, 500 l/min, the detent holds each position. Works without power or pilot air.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This 5/2-way push-pull knob valve lets the operator control a double-acting cylinder directly by hand. With G 1/8 ports and a 3.9 mm orifice it passes 500 l/min. The M 14x1 threaded neck screws straight into the control panel, leaving the knob on the front of the console. The detent holds each switching position until the operator moves it back. No power or pilot air is needed for this.
Advantages
- 3 supply and working ports G 1/8 plus 2 separate exhaust ports G 1/8, so each cylinder side can be speed-controlled individually
- Detent holds the position without power or pilot air, the switching state is visible at the knob
- Aluminum body and spool, NBR seals, working pressure 0 to 8 bar
- No lubrication required, runs on lubricated or dry air, temperature range -20 to 70 °C
- Panel mounting via M 14x1 thread for panels up to 6 mm thick
Applications
- Reversing double-acting cylinders on clamping and test fixtures by hand
- Opening and closing flaps, gates and doors that stay in position after switching
- Switching between two pneumatic circuits
- Control consoles and panels where only the knob protrudes at the front
The valve belongs to the E.MC R Series Hand Pull Valve.
Technical data
| Design | push-pull knob valve, axially operated, for panel mounting |
|---|---|
| Valve function | 5/2-way |
| Switching behavior | detent, position is held |
| Actuation | manual, push-pull knob |
| Supply and working ports | 3x G 1/8 |
| Exhaust ports | 2x G 1/8 |
| Orifice | 3.9 mm |
| Flow rate | 500 l/min |
| Working pressure | 0 to 8 bar |
| Max. pressure | 12 bar |
| Medium | compressed air, filtered to 40 µm, lubricated or dry |
| Lubrication | not required |
| Temperature range | -20 to 70 °C |
| Body and spool | aluminum |
| Seals | NBR |
| Supply connection | possible at any port |
| Panel thread | M 14x1 |
| Max. panel thickness | 6 mm |
| Knob diameter | 22 mm |
| Weight | 80 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | L 521-06 |
| EAN | 4050571459987 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 3,9 |
| Function | Raste |
| Flow rate [l/min] | 500 |
| Gewinde Abluft (2x) | G 1/8 |
| Temperaturbereich | -20-70 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.