Images are examples, some edited with AI. The technical data are authoritative. AI notice
3/2-way push-pull knob valve for panel mounting, G 1/2, detent, M 22x1.5 panel thread - E.MC
3/2-way push-pull knob valve for panels up to 6 mm thick, M 22x1.5 mounting thread. G 1/2, 2250 l/min, the detent holds each position. Works without power or pilot air.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This 3/2-way push-pull knob valve lets the operator control a single-acting cylinder or a pilot line directly by hand. With G 1/2 ports and a 8 mm orifice it passes 2250 l/min. The M 22x1.5 threaded neck screws straight into the control panel, leaving the knob on the front of the console. The detent holds each switching position until the operator moves it back. No power or pilot air is needed for this.
Advantages
- Supply can be connected to any port, so the same valve works normally closed, normally open or as a diverter between two lines
- Detent holds the position without power or pilot air, the switching state is visible at the knob
- Aluminum body and spool, NBR seals, working pressure 0 to 8 bar
- No lubrication required, runs on lubricated or dry air, temperature range -20 to 70 °C
- Panel mounting via M 22x1.5 thread for panels up to 6 mm thick
Applications
- Switching air to a fixture or machine section on and off by hand
- Sending a pilot signal to an air-piloted valve that stays on until switched back
- Operating single-acting clamping or ejector cylinders
- Control consoles and panels where only the knob protrudes at the front
The valve belongs to the E.MC R Series Hand Pull Valve.
Technical data
| Design | push-pull knob valve, axially operated, for panel mounting |
|---|---|
| Valve function | 3/2-way |
| Switching behavior | detent, position is held |
| Actuation | manual, push-pull knob |
| Supply and working ports | 2x G 1/2 |
| Exhaust ports | 1x G 1/2 |
| Orifice | 8 mm |
| Flow rate | 2250 l/min |
| Working pressure | 0 to 8 bar |
| Max. pressure | 12 bar |
| Medium | compressed air, filtered to 40 µm, lubricated or dry |
| Lubrication | not required |
| Temperature range | -20 to 70 °C |
| Body and spool | aluminum |
| Seals | NBR |
| Supply connection | possible at any port |
| Panel thread | M 22x1.5 |
| Max. panel thickness | 6 mm |
| Knob diameter | 22 mm |
| Weight | 410 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | L 324-15 |
| EAN | 4050571459864 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 8 |
| Function | Raste |
| Flow rate [l/min] | 2250 |
| Temperaturbereich | -20-70 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.