Images are examples, some edited with AI. The technical data are authoritative. AI notice
3/2-way push-pull knob valve for panel mounting, G 1/8, spring return, M 14x1 panel thread - E.MC
3/2-way push-pull knob valve for panels up to 6 mm thick, M 14x1 mounting thread. G 1/8, 500 l/min, spring return to the normal position. Works without power or pilot air.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
When a single-acting cylinder or a pilot line has to be switched without any electrics, one move of the push-pull knob does it. The G 1/8 valve flows 500 l/min through a 3.9 mm orifice. The M 14x1 threaded neck screws straight into the control panel, leaving the knob on the front of the console. The valve stays switched only while the operator holds it. On release, the spring restores the normal position.
Advantages
- Spring return: without actuation the valve always goes back to the same normal position
- Aluminum body and spool, NBR seals, working pressure 0 to 8 bar
- No lubrication required, runs on lubricated or dry air, temperature range -20 to 70 °C
- Panel mounting via M 14x1 thread for panels up to 6 mm thick
- Supply can be connected to any port, so the same valve works normally closed, normally open or as a diverter between two lines
Applications
- Jog operation where air flows only while the valve is actuated
- Enable signals that drop out automatically on release
- Single-acting cylinders that must return to their start position on release
- Control consoles and panels where only the knob protrudes at the front
Technical data
| Design | push-pull knob valve, axially operated, for panel mounting |
|---|---|
| Valve function | 3/2-way |
| Switching behavior | spring return to normal position |
| Actuation | manual, push-pull knob |
| Supply and working ports | 2x G 1/8 |
| Exhaust ports | 1x G 1/8 |
| Orifice | 3.9 mm |
| Flow rate | 500 l/min |
| Working pressure | 0 to 8 bar |
| Max. pressure | 12 bar |
| Medium | compressed air, filtered to 40 µm, lubricated or dry |
| Lubrication | not required |
| Temperature range | -20 to 70 °C |
| Body and spool | aluminum |
| Seals | NBR |
| Supply connection | possible at any port |
| Panel thread | M 14x1 |
| Max. panel thickness | 6 mm |
| Knob diameter | 22 mm |
| Weight | 70 g |
| Manufacturer | E.MC |
| Hersteller-Nr | L 321-06 S |
| EAN | 4050571459833 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 3,9 |
| Function | Federrückstellung |
| Flow rate [l/min] | 500 |
| Temperaturbereich | -20-70 °C |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.