Images are examples, some edited with AI. The technical data are authoritative. AI notice
3/2-way hand lever valve with detent, G 1/2, aluminum body, 2250 l/min - E.MC
3/2-way hand lever valve with G 1/2 ports and 2250 l/min for a single-acting cylinder or a pilot line. The detent holds the selected position without power or pilot air. Aluminum body, NBR seals.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This 3/2-way hand lever valve lets the operator control a single-acting cylinder or a pilot line directly by hand. With G 1/2 ports and a 8 mm orifice it passes 2250 l/min. The detent holds each switching position until the operator moves it back. No power or pilot air is needed for this.
Advantages
- Supply can be connected to any port, so the same valve works normally closed, normally open or as a diverter between two lines
- Detent holds the position without power or pilot air, the switching state is visible at the lever
- Aluminum body and spool, NBR seals, working pressure 0 to 8 bar
- No lubrication required, runs on lubricated or dry air, temperature range -20 to 70 °C
- 8 mm orifice at G 1/2 for large cylinders and short fill times
Applications
- Switching air to a fixture or machine section on and off by hand
- Sending a pilot signal to an air-piloted valve that stays on until switched back
- Operating single-acting clamping or ejector cylinders
The valve belongs to the E.MC H Series Hand Push Valve.
Technical data
| Design | hand lever valve with toggle lever |
|---|---|
| Valve function | 3/2-way |
| Switching behavior | detent, position is held |
| Actuation | manual, hand lever |
| Supply and working ports | 2x G 1/2 |
| Exhaust ports | 1x G 1/2 |
| Orifice | 8 mm |
| Flow rate | 2250 l/min |
| Working pressure | 0 to 8 bar |
| Max. pressure | 12 bar |
| Medium | compressed air, filtered to 40 µm, lubricated or dry |
| Lubrication | not required |
| Temperature range | -20 to 70 °C |
| Body and spool | aluminum |
| Seals | NBR |
| Supply connection | possible at any port |
| Mounting | 2 through holes Ø 4,2 mm |
| Weight | 550 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | H 324-15 |
| EAN | 4050571349882 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 8 |
| Function | Raste |
| Flow rate [l/min] | 2250 |
| Temperaturbereich | -20-70 °C |
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.