3/2-way hand lever valve with spring return, G 1/2, aluminum body, 2250 l/min - E.MC

When a single-acting cylinder or a pilot line has to be switched without any electrics, one move of the lever does it. The G 1/2 valve flows 2250 l/min through a 8 mm orifice. The valve stays switched only while the operator holds it. On release, the spring restores the normal position.

Advantages

• Spring return: without actuation the valve always goes back to the same normal position
• Aluminum body and spool, NBR seals, working pressure 0 to 8 bar
• No lubrication required, runs on lubricated or dry air, temperature range -20 to 70 °C
• 8 mm orifice at G 1/2 for large cylinders and short fill times
• Supply can be connected to any port, so the same valve works normally closed, normally open or as a diverter between two lines

Applications

• Jog operation where air flows only while the valve is actuated
• Enable signals that drop out automatically on release
• Single-acting cylinders that must return to their start position on release