E.MC
Repair kit for dual-rod cylinders with slide bearing guide, 25 mm bore - E.MC
Item FL-EXSM-25-REP
€19.98
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Dual-rod cylinder with slide bearing guide, 25 mm bore, 40 mm stroke, G 1/8 port - E.MC
For pick-and-place and guided lifting movements: dual-rod cylinder with 25 mm bore, 40 mm stroke and ±0.1° non-rotating accuracy. Operation at 1 to 10 bar, air port from above or below.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This 25 mm bore dual-rod cylinder is built for heavier attachments. Its two slide-bearing piston rods hold the plate to ±0.1° and take side loads without an additional guide. Stroke is 40 mm, with a permissible side load of 10.5 N on the plate. The adjusting nut shortens the stroke by up to 5 mm.
Advantages
- Stroke adjustment -5 to 0 mm, setting range 35 to 40 mm
- Guided by self-lubricating slide bearings, non-rotating accuracy ±0.1°
- Magnet fitted as standard for end position sensing with cylinder switches
- Operating pressure 1 to 10 bar, temperature range -20 to 70 °C
Applications
- Lifting and pushing axis for heavier grippers and fixtures
- Positioning workpiece carriers
- Raising and lowering workpieces at transfer stations
Accessories and spare parts
- Repair kit for 25 mm bore dual-rod cylinders, available separately
Technical data
| Property | Value |
|---|---|
| Design | Dual-rod cylinder, two piston rods, double-acting |
| Series | EXS Series Double Shaft Cylinder, type M (E.MC) |
| Guide | Slide bearing, self-lubricating |
| Bore | 25 mm |
| Stroke | 40 mm |
| Stroke adjustment | -5 to 0 mm, setting range 35 to 40 mm |
| Stroke tolerance | +1.0/0 mm |
| Permissible side load | 10.5 N |
| Non-rotating accuracy | ±0.1° |
| Air port | G 1/8, from above or below |
| Magnet | Standard, NdFeB |
| Operating pressure | 1 to 10 bar |
| Proof pressure | 15 bar |
| Temperature | -20 to 70 °C, no freezing |
| Piston speed | 30 to 500 mm/s |
| Cushioning | Rubber bumpers, TPU end cushions, POM stop bumper |
| Medium | Compressed air, filtered to 40 µm |
| Materials | Body, base and end plate, covers and pistons aluminium alloy, piston rods S45C carbon steel, hard chrome-plated |
| Seals | Wiper, O-ring and piston seal NBR, PTFE guide ring |
| Weight | 800 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | EXSM 25/40 |
| EAN | 4050571874490 |
| Zolltarifnummer | 84123100 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Doppelkolbenzylinder |
| Thread | G 1/8 |
| Piston Ø [mm] | 25 |
| Stroke [mm] | 40 |
| Bore (mm) | 25 |
| Temperaturbereich | -20-70 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.