E.MC
Repair kit for dual-rod cylinders with slide bearing guide, 25 mm bore - E.MC
Item FL-EXSM-25-REP
€19.98
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Dual-rod cylinder with slide bearing guide, 25 mm bore, 30 mm stroke, G 1/8 port - E.MC
A guided lifting axis without an external guide: this 25 mm bore dual-rod cylinder with 30 mm stroke carries grippers and suction cups directly on its plate. Slide bearings, magnet as standard, G 1/8 port.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This 25 mm bore dual-rod cylinder is built for heavier attachments. Its two slide-bearing piston rods hold the plate to ±0.1° and take side loads without an additional guide. Stroke is 30 mm, with a permissible side load of 11.8 N on the plate. The adjusting nut shortens the stroke by up to 5 mm.
Advantages
- Guided by self-lubricating slide bearings, non-rotating accuracy ±0.1°
- Hard chrome-plated carbon steel piston rods, PTFE guide ring
- Permissible side load 11.8 N at 30 mm stroke, no external guide needed
- Air port G 1/8 from above or below, the unused port is plugged
Applications
- Lifting and pushing axis for heavier grippers and fixtures
- Positioning workpiece carriers
- Raising and lowering workpieces at transfer stations
Accessories and spare parts
- Repair kit for 25 mm bore dual-rod cylinders, available separately
Technical data
| Property | Value |
|---|---|
| Design | Dual-rod cylinder, two piston rods, double-acting |
| Series | EXS Series Double Shaft Cylinder, type M (E.MC) |
| Guide | Slide bearing, self-lubricating |
| Bore | 25 mm |
| Stroke | 30 mm |
| Stroke adjustment | -5 to 0 mm, setting range 25 to 30 mm |
| Stroke tolerance | +1.0/0 mm |
| Permissible side load | 11.8 N |
| Non-rotating accuracy | ±0.1° |
| Air port | G 1/8, from above or below |
| Magnet | Standard, NdFeB |
| Operating pressure | 1 to 10 bar |
| Proof pressure | 15 bar |
| Temperature | -20 to 70 °C, no freezing |
| Piston speed | 30 to 500 mm/s |
| Cushioning | Rubber bumpers, TPU end cushions, POM stop bumper |
| Medium | Compressed air, filtered to 40 µm |
| Materials | Body, base and end plate, covers and pistons aluminium alloy, piston rods S45C carbon steel, hard chrome-plated |
| Seals | Wiper, O-ring and piston seal NBR, PTFE guide ring |
| Weight | 750 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | EXSM 25/30 |
| EAN | 4050571874483 |
| Zolltarifnummer | 84123100 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Doppelkolbenzylinder |
| Thread | G 1/8 |
| Piston Ø [mm] | 25 |
| Stroke [mm] | 30 |
| Bore (mm) | 25 |
| Temperaturbereich | -20-70 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.