E.MC
Repair kit for dual-rod cylinders with slide bearing guide, 16 mm bore - E.MC
Item FL-EXSM-16-REP
€19.40
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Dual-rod cylinder with slide bearing guide, 16 mm bore, 75 mm stroke, M5 port - E.MC
For pick-and-place and guided lifting movements: dual-rod cylinder with 16 mm bore, 75 mm stroke and ±0.15° non-rotating accuracy. Operation at 1 to 10 bar, air port from above or below.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Two piston rods in self-lubricating slide bearings guide the plate of this dual-rod cylinder from the E.MC EXS Series Double Shaft Cylinder range, type M. With a 16 mm bore it pushes grippers, stops and workpieces, and non-rotating accuracy is ±0.15°. Even at 75 mm stroke, 2 N of side load is permissible. The adjusting nut shortens the stroke by up to 5 mm.
Advantages
- Guided by self-lubricating slide bearings, non-rotating accuracy ±0.15°
- Air port M5 from above or below, the unused port is plugged
- Stroke adjustment -5 to 0 mm, setting range 70 to 75 mm
- Hard chrome-plated carbon steel piston rods, PTFE guide ring
Applications
- Lifting axis for grippers in pick-and-place units
- Pushing workpieces that must not rotate
- Stoppers with a wide stop plate on transfer conveyors
Accessories and spare parts
- Repair kit for 16 mm bore dual-rod cylinders, available separately
Technical data
| Property | Value |
|---|---|
| Design | Dual-rod cylinder, two piston rods, double-acting |
| Series | EXS Series Double Shaft Cylinder, type M (E.MC) |
| Guide | Slide bearing, self-lubricating |
| Bore | 16 mm |
| Stroke | 75 mm |
| Stroke adjustment | -5 to 0 mm, setting range 70 to 75 mm |
| Stroke tolerance | +1.0/0 mm |
| Permissible side load | 2 N |
| Non-rotating accuracy | ±0.15° |
| Air port | M5, from above or below |
| Magnet | Standard, NdFeB |
| Operating pressure | 1 to 10 bar |
| Proof pressure | 15 bar |
| Temperature | -20 to 70 °C, no freezing |
| Piston speed | 30 to 500 mm/s |
| Cushioning | Rubber bumpers, TPU end cushions, POM stop bumper |
| Medium | Compressed air, filtered to 40 µm |
| Materials | Body, base and end plate, covers and pistons aluminium alloy, piston rods S45C carbon steel, hard chrome-plated |
| Seals | Wiper, O-ring and piston seal NBR, PTFE guide ring |
| Weight | 430 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | EXSM 16/75 |
| EAN | 4050571874315 |
| Zolltarifnummer | 84123100 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Doppelkolbenzylinder |
| Thread | M 5 |
| Piston Ø [mm] | 16 |
| Stroke [mm] | 75 |
| Bore (mm) | 16 |
| Temperaturbereich | -20-70 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.