Compact slide cylinder with linear ball guide, double-acting, 6 mm bore, 5 mm stroke - E.MC

The smallest compact slide in the EXH series moves sensors, nozzles and light gripper jaws over a 5 mm stroke with a 6 mm bore. Slide table and linear ball guide form one unit that takes loads without an extra guide. With a 5 mm stroke the slide is particularly short.

Advantages

• Linear ball guide with stainless steel rail and balls, permissible moments 0.25 / 0.25 / 0.41 Nm (Mp / My / Mr)
• Stainless steel piston rod, NBR seals, body and slide table in aluminium alloy
• M5 air port usable from three sides, so piping can follow the mounting position
• Mounting from the side via through holes or threads, vertically or axially, workpiece on the front or top
• Neodymium iron boron magnet as standard for end position sensing with cylinder switches

Applications

• Advancing sensors and test probes
• Short stroke axis for nozzles when dispensing or blowing off
• Moving light gripper jaws in small-part assembly

E.MC recommends a flow control valve to keep the slide at 500 mm/s or below, and a load coaxial with the piston rod.

Accessories and spare parts

A repair kit for compact slides with a 6 mm bore is available separately. For end position sensing via the magnet, E.MC offers matching cylinder switches.