Compact slide cylinder with linear ball guide, double-acting, 20 mm bore, 10 mm stroke - E.MC

The largest compact slide in the EXH series combines a 20 mm bore with a 10 mm stroke for pick-and-place axes carrying heavier grippers. The linear ball guide allows moments up to 6.61 Nm, and the rubber bumper absorbs up to 0.1 J of kinetic energy. With a 10 mm stroke the slide is particularly short.

Advantages

• Linear ball guide with stainless steel rail and balls, permissible moments 6.29 / 6.29 / 6.61 Nm (Mp / My / Mr)
• Neodymium iron boron magnet as standard for end position sensing with cylinder switches
• Mounting from the side via through holes or threads, vertically or axially, workpiece on the front or top
• Piston speed 50 to 500 mm/s, stroke tolerance +1.0 / 0 mm

Applications

• Transferring parts between conveyors and workpiece carriers
• Pressing and positioning in test fixtures
• Pick-and-place axis with a heavier gripper

E.MC recommends a flow control valve to keep the slide at 500 mm/s or below, and a load coaxial with the piston rod.

Accessories and spare parts

A repair kit for compact slides with a 20 mm bore is available separately. For end position sensing via the magnet, E.MC offers matching cylinder switches.