Compact slide, double-acting, 25 mm bore, 100 mm stroke, standard version with rubber buffers - E.MC

Table, guide and drive share one flat aluminium body. The 25 mm piston moves the table 100 mm and carries loads up to 70 N on the way. In the standard version TPU rubber buffers cushion both end positions, rated for 0.22 J of kinetic energy.

Advantages

• TPU rubber buffers at both ends, permissible kinetic energy 0.22 J
• Linear roller guide in the table, permissible load up to 70 N at 25 mm bore
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning
• Operating pressure 1.5 to 7 bar, piston speed 50 to 500 mm/s
• Magnetic piston with NdFeB magnet for non-contact end position sensing with cylinder switches

Applications

• Cross axis for transfer units moving parts between two stations over a longer distance
• Feeding workpiece carriers or magazines with a guided motion
• Long stroke for tools or grippers where a cylinder with a separate guide would take up too much space

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 25 mm bore. Fixed stops and shock absorbers can be retrofitted to one or both ends of travel. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.