Compact slide, double-acting, 25 mm bore, 100 mm stroke, shock absorber at extend end - E.MC

Built for precisely guided strokes with a tool or gripper mounted on top: 25 mm bore, 100 mm stroke and a roller guide rated for up to 70 N. The shock absorber at the extend end decelerates the load smoothly and doubles the permissible kinetic energy over the standard version to 0.44 J.

Advantages

• Linear roller guide in the table, permissible load up to 70 N at 25 mm bore
• Shock absorber at the extend end, permissible kinetic energy 0.44 J instead of 0.22 J
• Piston rod, locating pins and fixing screws in stainless steel, body and table in aluminium alloy
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning
• Operating pressure 1.5 to 7 bar, piston speed 50 to 500 mm/s

Applications

• Cross axis for transfer units moving parts between two stations over a longer distance
• Feeding workpiece carriers or magazines with a guided motion
• Long stroke for tools or grippers where a cylinder with a separate guide would take up too much space, even with heavier loads or speeds close to 500 mm/s

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 25 mm bore. Further stroke limiters with fixed stop or shock absorber can be added as retrofit kits. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.