Compact slide, double-acting, 25 mm bore, 100 mm stroke, shock absorbers at both ends - E.MC

Table, guide and drive share one flat aluminium body. The 25 mm piston moves the table 100 mm and carries loads up to 70 N on the way. The shock absorber at both ends of travel decelerates the load smoothly and doubles the permissible kinetic energy over the standard version to 0.44 J.

Advantages

• Shock absorber at both ends of travel, permissible kinetic energy 0.44 J instead of 0.22 J
• Linear roller guide in the table, permissible load up to 70 N at 25 mm bore
• Magnetic piston with NdFeB magnet for non-contact end position sensing with cylinder switches
• Piston rod, locating pins and fixing screws in stainless steel, body and table in aluminium alloy
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning

Applications

• Cross axis for transfer units moving parts between two stations over a longer distance, even with heavier loads or speeds close to 500 mm/s
• Feeding workpiece carriers or magazines with a guided motion
• Long stroke for tools or grippers where a cylinder with a separate guide would take up too much space

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 25 mm bore. Further stroke limiters with fixed stop or shock absorber can be added as retrofit kits. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.