Compact slide, double-acting, 25 mm bore, 10 mm stroke, standard version with rubber buffers - E.MC

Built for precisely guided strokes with a tool or gripper mounted on top: 25 mm bore, 10 mm stroke and a roller guide rated for up to 70 N. In the standard version TPU rubber buffers cushion both end positions, rated for 0.22 J of kinetic energy.

Advantages

• Linear roller guide in the table, permissible load up to 70 N at 25 mm bore
• TPU rubber buffers at both ends, permissible kinetic energy 0.22 J
• Piston rod, locating pins and fixing screws in stainless steel, body and table in aluminium alloy
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning
• Operating pressure 1.5 to 7 bar, piston speed 50 to 500 mm/s

Applications

• Infeed movements in test and assembly fixtures that need only a few millimetres of travel
• Stoppers and pushers on transfer conveyors, with the workpiece contact mounted directly on the table
• Lift axis for small vacuum cups or grippers in pick-and-place units

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 25 mm bore. Fixed stops and shock absorbers can be retrofitted to one or both ends of travel. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.