Compact slide, double-acting, 25 mm bore, 10 mm stroke, adjustable fixed stop at retract end - E.MC

Table, guide and drive share one flat aluminium body. The 25 mm piston moves the table 10 mm and carries loads up to 70 N on the way. The fixed stop at the retract end lets you set the stroke anywhere from 0 to 10 mm.

Advantages

• Fixed stop at the retract end, stroke adjustable from 0 to 10 mm
• Linear roller guide in the table, permissible load up to 70 N at 25 mm bore
• Piston rod, locating pins and fixing screws in stainless steel, body and table in aluminium alloy
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning
• Operating pressure 1.5 to 7 bar, piston speed 50 to 500 mm/s

Applications

• Infeed movements in test and assembly fixtures that need only a few millimetres of travel
• Stoppers and pushers on transfer conveyors, with the workpiece contact mounted directly on the table
• Lift axis for small vacuum cups or grippers in pick-and-place units
• Machines where the end position has to be matched to the workpiece during setup

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 25 mm bore. Further stroke limiters with fixed stop or shock absorber can be added as retrofit kits. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.