Compact slide, double-acting, 25 mm bore, 10 mm stroke, adjustable fixed stop at extend end - E.MC

This double-acting compact slide moves its table through 10 mm of stroke on a linear roller guide. With a 25 mm bore and G 1/8 port it handles loads up to 70 N. The fixed stop at the extend end lets you set the stroke anywhere from 0 to 10 mm.

Advantages

• Linear roller guide in the table, permissible load up to 70 N at 25 mm bore
• Fixed stop at the extend end, stroke adjustable from 0 to 10 mm
• Magnetic piston with NdFeB magnet for non-contact end position sensing with cylinder switches
• Piston rod, locating pins and fixing screws in stainless steel, body and table in aluminium alloy
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning

Applications

• Infeed movements in test and assembly fixtures that need only a few millimetres of travel
• Stoppers and pushers on transfer conveyors, with the workpiece contact mounted directly on the table
• Lift axis for small vacuum cups or grippers in pick-and-place units
• Machines where the end position has to be matched to the workpiece during setup

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 25 mm bore. Further stroke limiters with fixed stop or shock absorber can be added as retrofit kits. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.