Compact slide, double-acting, 20 mm bore, 50 mm stroke, standard version with rubber buffers - E.MC

Table, guide and drive share one flat aluminium body. The 20 mm piston moves the table 50 mm and carries loads up to 40 N on the way. In the standard version TPU rubber buffers cushion both end positions, rated for 0.13 J of kinetic energy.

Advantages

• TPU rubber buffers at both ends, permissible kinetic energy 0.13 J
• Linear roller guide in the table, permissible load up to 40 N at 20 mm bore
• Piston rod, locating pins and fixing screws in stainless steel, body and table in aluminium alloy
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning
• Operating pressure 1.5 to 7 bar, piston speed 50 to 500 mm/s

Applications

• Lift or cross axis in pick-and-place units with a gripper or vacuum cup on the table
• Positioning and inserting small parts in assembly stations
• Moving test heads or sensors to the workpiece in inspection fixtures

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 20 mm bore. Fixed stops and shock absorbers can be retrofitted to one or both ends of travel. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.