Compact slide, double-acting, 20 mm bore, 30 mm stroke, adjustable fixed stop at retract end - E.MC

Built for precisely guided strokes with a tool or gripper mounted on top: 20 mm bore, 30 mm stroke and a roller guide rated for up to 40 N. The fixed stop at the retract end lets you set the stroke anywhere from 20 to 30 mm.

Advantages

• Linear roller guide in the table, permissible load up to 40 N at 20 mm bore
• Fixed stop at the retract end, stroke adjustable from 20 to 30 mm
• Mounting from three sides, locating holes in the table for repeatable workpiece positioning
• Operating pressure 1.5 to 7 bar, piston speed 50 to 500 mm/s
• Magnetic piston with NdFeB magnet for non-contact end position sensing with cylinder switches

Applications

• Lift or cross axis in pick-and-place units with a gripper or vacuum cup on the table
• Positioning and inserting small parts in assembly stations
• Moving test heads or sensors to the workpiece in inspection fixtures
• Machines where the end position has to be matched to the workpiece during setup

E.MC recommends meter-out speed control with a flow control valve, keeping speed below 500 mm/s. When mounting several slides side by side, leave at least 3 mm between them so the cylinder switches do not interfere with each other.

Accessories and spare parts

A matching repair kit is available for the 20 mm bore. Further stroke limiters with fixed stop or shock absorber can be added as retrofit kits. E.MC also offers matching cylinder switches for end position sensing via the magnetic piston.