E.MC
Solenoid coil type Z, 24 V DC, 10 W, 11.2 mm armature bore, connector size 1 - E.MC
Item FL-MAG-Z-24V
€17.66
Images are examples, some edited with AI. The technical data are authoritative. AI notice
2/2-way solenoid valve, direct-acting, brass, G 1/4, normally open, FKM seal, 24 V DC - E.MC
Compact G 1/4 brass valve with FKM (Viton) seal, normally open and directly actuated. Because it switches from 0 bar, it stays reliable even where hardly any medium is drawn off downstream. 24 V DC coil, IP65.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
In pilot air lines, at blow-off nozzles and in small water or oil circuits, this valve switches flow through a 3 mm orifice. The solenoid lifts the seat directly, so the valve works from 0 to 7 bar with no minimum differential. With no current the passage is open and only the energised coil shuts it. If power fails, the medium keeps flowing.
Advantages
- Brass body and IP65: class F coil insulation, watertight connector to DIN 40050.
- Switches from 0 bar: no minimum differential, dependable even with little downstream demand, up to 7 bar.
- Compact: 39 mm body length, 23 mm width, mounted via two M5 threads in the body.
- FKM (Viton) seal: The manufacturer standard on the direct-acting G 1/8 and G 1/4 sizes.
Applications
- Blow-off air at nozzles for cleaning or ejecting parts.
- Circuits that should stay open at rest or during a power failure, for example cooling or venting.
- Small water and oil lines, for example for dosing or spot cooling.
- Circuits with fluctuating or very low pressure where a pilot-operated valve would not switch reliably.
Accessories and spare parts
- Replacement coil type Z for 24 V DC, exchangeable without opening the line.
The valve belongs to the E.MC ELP series and is supplied with coil and connector.
Technical data
| Property | Value |
|---|---|
| Design | 2/2-way solenoid valve, direct-acting |
| Function | normally open (NO) |
| Port | G 1/4 female thread |
| Orifice | 3 mm |
| Flow | Cv 0.33, Kv 3.2 l/min |
| Pressure differential | 0 to 7 bar |
| Media | compressed air, water, hot water, oil up to 20 cSt |
| Operating temperature | -20 to 80 °C, non-freezing |
| Ambient temperature | max. 50 °C |
| Body | brass |
| Internal parts | brass, stainless steel |
| Seal | FKM (Viton) |
| Control voltage | 24 V DC |
| Voltage tolerance | -15 to +10 % |
| Power consumption | 10 W |
| Coil | type Z, insulation class F |
| Electrical connection | plug connector, included |
| Protection class | IP65 (DIN 40050) |
| Mounting position | solenoid upright |
| Dimensions L x W x H | 39 x 23 x 78.2 mm |
| Weight | 300 g |
| Mounting | 2 x M5, 5 mm deep |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | ELPH 14 24V= |
| EAN | 4050571925123 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | 2/2-Wege Magnetventil |
| Bauform Magnetspule | Z |
| Thread | G 1/4 |
| Nominal size DN [mm] | 3 |
| Medium | Druckluft, neutrale Gase, Wasser, neutrale dünnflüssige Medien, andere Medien auf Anfrage |
| Kv-Wert [l/min] | 3,2 |
| Leistungsaufnahme (DC) [W] | 10 |
| Dichtungen | FKM |
| Operating voltage | 24 V DC |
| Betriebsdruck max [bar] | 7 |
| Temperaturbereich | -10-130 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.