E.MC
Solenoid coil type Y, 24 V AC, 15 VA, 11.2 mm armature bore, connector size 1 - E.MC
Item FL-MAG-Y-24VAC
€17.66
Images are examples, some edited with AI. The technical data are authoritative. AI notice
2/2-way solenoid valve, direct-acting, brass, G 1/4, normally closed, FKM seal, 24 V AC - E.MC
Direct-acting 2/2-way brass solenoid valve, G 1/4, normally closed, for air, water and light oil. It switches from 0 bar with no minimum pressure differential up to 13 bar, which suits small flows and pilot air.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The G 1/4 2/2-way valve shuts or opens a line with a 3 mm orifice and needs no inlet pressure to do it. The coil armature acts directly on the seat, giving a working range of 0 to 13 bar. With no current the passage stays shut, so the valve closes the line by itself if the supply fails.
Advantages
- FKM (Viton) seal: The manufacturer standard on the direct-acting G 1/8 and G 1/4 sizes.
- Brass body and IP65: class F coil insulation, watertight connector to DIN 40050.
- Switches from 0 bar: no minimum differential, dependable even with little downstream demand, up to 13 bar.
- Compact: 39 mm body length, 23 mm width, mounted via two M5 threads in the body.
Applications
- Pilot air for pneumatic actuators and pilot-operated valves.
- Systems where the line must close by itself if power fails.
- Small water and oil lines, for example for dosing or spot cooling.
- Circuits with fluctuating or very low pressure where a pilot-operated valve would not switch reliably.
Accessories and spare parts
- Replacement coil type Y for 24 V AC, exchangeable without opening the line.
The valve belongs to the E.MC ELP series and is supplied with coil and connector.
Technical data
| Property | Value |
|---|---|
| Design | 2/2-way solenoid valve, direct-acting |
| Function | normally closed (NC) |
| Port | G 1/4 female thread |
| Orifice | 3 mm |
| Flow | Cv 0.33, Kv 3.2 l/min |
| Pressure differential | 0 to 13 bar |
| Media | compressed air, water, hot water, oil up to 20 cSt |
| Operating temperature | -20 to 80 °C, non-freezing |
| Ambient temperature | max. 50 °C |
| Body | brass |
| Internal parts | brass, stainless steel |
| Seal | FKM (Viton) |
| Control voltage | 24 V AC |
| Voltage tolerance | -15 to +10 % |
| Power consumption | 15 VA |
| Coil | type Y, insulation class F |
| Electrical connection | plug connector, included |
| Protection class | IP65 (DIN 40050) |
| Mounting position | solenoid upright |
| Dimensions L x W x H | 39 x 23 x 73.7 mm |
| Weight | 300 g |
| Mounting | 2 x M5, 5 mm deep |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | ELP 14 24VAC |
| EAN | 4050571924591 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | 2/2-Wege Magnetventil |
| Bauform Magnetspule | Y |
| Thread | G 1/4 |
| Nominal size DN [mm] | 3 |
| Medium | Druckluft, neutrale Gase, Wasser, neutrale dünnflüssige Medien, andere Medien auf Anfrage |
| Kv-Wert [l/min] | 3,2 |
| Leistungsaufnahme (AC) [VA] | 15 |
| Dichtungen | FKM |
| Operating voltage | 24 V AC |
| Betriebsdruck max [bar] | 13 |
| Temperaturbereich | -10-130 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.