Images are examples, some edited with AI. The technical data are authoritative. AI notice

Servo motor 440 W, 1.66 Nm standstill torque, multi-turn encoder EMMT-AS-60-L-LS-RM - Festo 5242213

Festo ✓ Original product Brand new

1.4 Nm nominal torque and 5.6 Nm peak torque make the EMMT-AS-60-L-LS-RM a drive for dynamic positioning tasks. Rated power 440 W at 3000 1/min, designed for 325 V DC. A multi-turn absolute encoder (EnDat 22) captures the rotor position.

Net
€792.07
excl. VAT
Item FES-5242213
Manufacturer no. EMMT-AS-60-L-LS-RM

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

1.4 Nm nominal torque at 3000 1/min: the Festo EMMT-AS-60-L-LS-RM servo motor delivers 440 W rated power to the axis. Total moment of inertia is 0.403 kgcm².

Benefits

  • Peak torque 5.6 Nm for short cycles and acceleration phases
  • Speed up to 6800 1/min, nominal speed 3000 1/min
  • Multi-turn absolute encoder with 4096 absolute revolutions, no homing run after power-up
  • Cogging torque below 1.0 % of peak torque, smooth running even at low speeds
  • Degree of protection IP40, ambient temperature -15 to 40 °C

Application

The EMMT-AS-60-L-LS-RM drives linear axes, spindles and gear units. Permitted radial shaft load is 350 N.

Technical data

TypeEMMT-AS-60-L-LS-RM
Festo part no.5242213
Weight2.1 kg
Ambient temperature-15 to 40 °C
Note on ambient temperatureUp to 80 °C with derating of -1.5% per °C
Maximum installation height4000 m
Note on maximum installation heightAs of 1,000 m: only with derating of -1.0% per 100 m
Storage temperature-20 to 70 °C
Relative air humidity0 - 90%
Conforms to standardIEC 60034
Temperature class as per EN 60034-1F
Maximum winding temperature155 °C
Rating class as per EN 60034-1S1
Temperature monitoringDigital motor temperature transmission via EnDat 2.2
Motor type to EN 60034-7IM B5, IM V1, IM V3
Mounting positionAny
Degree of protectionIP40
Note on degree of protectionIP40 motor shaft without rotary shaft seal, IP65 motor shaft with rotary shaft seal, IP67 for motor housing including connection technology
Concentricity, coaxiality, axial runout to DIN SPEC 42955N
Balance qualityG 2.5
Detent torque&lt, 1.0% of peak torque
Bearing lifetime under nominal conditions20000 h
Interface code, motor out60P
Electrical connection 1, connection typeHybrid plug
Electrical connection 1, connector systemM23x1
Electrical connection 1, number of connections/cores15
Pollution degree2
Note on materialsContains PWIS (LABS) substances, RoHS compliant
Corrosion resistance class CRC0 - No corrosion stress
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
ApprovalRCM mark, c UL us - Recognized (OL)
CE mark (see declaration of conformity)To EU EMC Directive, To EU Low Voltage Directive, In accordance with EU RoHS Directive
Certificate issuing authorityUL E342973
Nominal operating voltage DC325 V
Type of winding switchStar inside
Number of pole pairs5
Standstill torque1.66 Nm
Nominal torque1.4 Nm
Peak torque5.6 Nm
Nominal rotary speed3000 1/min
Maximum rotational speed6800 1/min
Maximum mechanical speed16000 1/min
Nominal power rating of motor440 W
Continuous stall current3.8 A
Nominal motor current3.2 A
Peak current18.3 A
Motor constant0.44 Nm/A
Standstill torque constant0.52 Nm/A
Voltage constant, phase-to-phase31.2 mVmin
Phase-phase winding resistance2.68 Ohm
Phase-phase winding inductance7 mH
Winding longitudinal inductivity Ld (phase)4.2 mH
Winding cross inductivity Lq (phase)5 mH
Electric time constant3 ms
Thermal time constant43 min
Thermal resistance1 K/W
Measuring flange250 x 250 x 15 mm, steel
Total mass moment of inertia of output0.403 kgcm²
Product weight1910 g
Permissible axial shaft load70 N
Permissible radial shaft load350 N
Rotor position sensorAbsolute encoder, multi-turn
Rotor position sensor, manufacturer designationEQI 1131
Rotor position sensor, absolute detectable revolutions4096
Rotor position encoder interfaceEnDat 22
Rotor position sensor, encoder measuring principleInductive
Rotor position sensor, DC operating voltage5 V
Rotor position sensor, DC operating voltage range3.6 to 14 V
Rotor position sensor, position values per revolution524288
Rotor position transducer resolution19 Bit
Rotor position sensor, system accuracy of angle measurement-120 to 120 arcsec
Mean time to failure (MTTF), subcomponent190 years, rotor position encoder
MTTFd, subcomponent380 years, rotor position encoder
ManufacturerFesto
Hersteller-NrEMMT-AS-60-L-LS-RM
EAN4052568421885
Zolltarifnummer85015100
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
AusführungMultiturn-Absolutwertgeber, ohne Haltebremse
NormDIN EN 60034-1, DIN EN 60034-7, DIN EN 60034
Operating conditionsEN 60068-2-27, EN 60068-2-6
Operating voltage325 V DC
SeriesEMMT
Protection ratingIP40
Temperature (max.)40

Downloads

Accessories

Show 4 more items

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.