Images are examples, some edited with AI. The technical data are authoritative. AI notice

Servo motor 4420 W, 25.48 Nm standstill torque, holding brake, multi-turn encoder EMMS-AS-140-L-HS-RMB - Festo 550138

Festo ✓ Original product Brand new

20.05 Nm nominal torque and 48.8 Nm peak torque make the EMMS-AS-140-L-HS-RMB a drive for dynamic positioning tasks. Rated power 4420 W at 2000 1/min, designed for 565 V DC. A multi-turn absolute encoder (EnDat 22) captures the rotor position, the holding brake holds 18 Nm.

Net
€3,796.67
excl. VAT
Item FES-550138
Manufacturer no. EMMS-AS-140-L-HS-RMB
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The Festo EMMS-AS-140-L-HS-RMB is a servo motor with 4420 W rated power and 25.48 Nm standstill torque. Total moment of inertia is 20.108 kgcm².

Benefits

  • Peak torque 48.8 Nm for short cycles and acceleration phases
  • Speed up to 2460 1/min, nominal speed 2000 1/min
  • Multi-turn absolute encoder with 19 Bit resolution, no homing run after power-up
  • Holding brake 18 Nm, operating voltage 24 V DC
  • Degree of protection IP54, ambient temperature -10 to 40 °C

Application

Typical uses are positioning axes, feed systems and pick-and-place units. Before mounting, match the interface and shaft loads of the EMMS-AS-140-L-HS-RMB to the mechanics.

Technical data

TypeEMMS-AS-140-L-HS-RMB
Festo part no.550138
Weight19 kg
Ambient temperature-10 to 40 °C
Storage temperature-20 to 60 °C
Relative air humidity0 - 90%
Conforms to standardIEC 60034
Insulation classF
Rating class as per EN 60034-1S1
Temperature monitoringPTC resistor
Degree of protectionIP54
Electrical connection technologyPlug
Note on materialsRoHS compliant
Corrosion resistance class CRC2 - Moderate corrosion stress
ApprovalRCM mark, c UL us - Recognized (OL)
CE mark (see declaration of conformity)To EU EMC Directive, To EU Low Voltage Directive
Nominal voltage DC565 V
Type of winding switchStar inside
Number of pole pairs6
Standstill torque25.48 Nm
Nominal torque20.05 Nm
Peak torque48.8 Nm
Nominal rotary speed2000 1/min
Maximum rotational speed2460 1/min
Nominal power rating of motor4420 W
Nominal motor current7.8 A
Peak current20 A
Motor constant2.72 Nm/A
Voltage constant, phase-to-phase162.39 mVmin
Phase-phase winding resistance1.41 Ohm
Phase-phase winding inductance13.44 mH
Total mass moment of inertia of output20.108 kgcm²
Product weight17000 g
Permissible axial shaft load200 N
Permissible radial shaft load1060 N
Rotor position sensorAbsolute encoder, multi-turn
Rotor position encoder interfaceEnDat 22
Rotor position sensor, encoder measuring principleInductive
Mean time to failure (MTTF), subcomponent4469 years, holding brake, 76 years, rotor position encoder
MTTFd, subcomponent152 years, rotor position encoder
Brake holding torque18 Nm
Operating voltage DC for brake24 V
Power consumption, brake15.6 W
Mass moment of inertia of brake1.082 kgcm²
Switching cycles holding brake5 million idle actuations (without friction work)
Rotor position transducer resolution19 Bit
ManufacturerFesto
Hersteller-NrEMMS-AS-140-L-HS-RMB
EAN4052568191955
Zolltarifnummer85015220
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
AusführungMultiturn-Absolutwertgeber, mit Haltebremse
NormDIN EN 60034-1, DIN EN 60034
Operating voltage565 V DC
SeriesEMMS
Protection ratingIP54
Temperature (max.)40

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.