Images are examples, some edited with AI. The technical data are authoritative. AI notice
Servo motor 190 W, 0.7 Nm standstill torque, holding brake, multi-turn encoder EMME-AS-60-S-LS-AMB - Festo 2089701
0.6 Nm nominal torque and 2.8 Nm peak torque make the EMME-AS-60-S-LS-AMB a drive for dynamic positioning tasks. Rated power 190 W at 3000 1/min, designed for 360 V DC. A multi-turn absolute encoder (HIPERFACE®) captures the rotor position, the holding brake holds 2 Nm.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo EMME-AS-60-S-LS-AMB servo motor: 190 W rated power, 0.6 Nm nominal torque, up to 2.8 Nm in peak operation. Total moment of inertia is 0.319 kgcm².
Benefits
- Peak torque 2.8 Nm for short cycles and acceleration phases
- Speed up to 5131 1/min, nominal speed 3000 1/min
- Multi-turn absolute encoder with 12 Bit resolution, no homing run after power-up
- Holding brake 2 Nm, operating voltage 24 V DC
- Degree of protection IP21, ambient temperature -10 to 40 °C
Application
Typical uses are positioning axes, feed systems and pick-and-place units. Before mounting, match the interface and shaft loads of the EMME-AS-60-S-LS-AMB to the mechanics.
Technical data
| Type | EMME-AS-60-S-LS-AMB |
|---|---|
| Festo part no. | 2089701 |
| Weight | 2.2 kg |
| Ambient temperature | -10 to 40 °C |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 0 - 90% |
| Conforms to standard | IEC 60034 |
| Insulation class | F |
| Rating class as per EN 60034-1 | S1 |
| Degree of protection | IP21 |
| Electrical connection technology | Plug |
| Note on materials | Contains PWIS (LABS) substances, RoHS compliant |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Approval | RCM mark, c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Low Voltage Directive |
| Nominal operating voltage DC | 360 V |
| Nominal voltage DC | 360 V |
| Type of winding switch | Star inside |
| Number of pole pairs | 3 |
| Standstill torque | 0.7 Nm |
| Nominal torque | 0.6 Nm |
| Peak torque | 2.8 Nm |
| Nominal rotary speed | 3000 1/min |
| Maximum rotational speed | 5131 1/min |
| Nominal power rating of motor | 190 W |
| Continuous stall current | 0.9 A |
| Nominal motor current | 0.8 A |
| Peak current | 3.6 A |
| Motor constant | 0.75 Nm/A |
| Voltage constant, phase-to-phase | 49.6 mVmin |
| Phase-phase winding resistance | 26.4 Ohm |
| Phase-phase winding inductance | 31.9 mH |
| Total mass moment of inertia of output | 0.319 kgcm² |
| Product weight | 1650 g |
| Permissible axial shaft load | 50 N |
| Permissible radial shaft load | 250 N |
| Rotor position sensor | Absolute encoder, multi-turn |
| Rotor position encoder interface | HIPERFACE® |
| Rotor position sensor, encoder measuring principle | Capacitive |
| Rotor position encoder sine/cosine periods per revolution | 16 |
| Rotor position encoder resolution, typical | 12 Bit |
| Rotor position encoder angular accuracy, typical | 20 arcmin |
| MTTFd, subcomponent | 271 years, rotor position encoder |
| Brake holding torque | 2 Nm |
| Operating voltage DC for brake | 24 V |
| Power consumption, brake | 11 W |
| Mass moment of inertia of brake | 0.086 kgcm² |
| Switching cycles holding brake | 5 million idle actuations (without friction work) |
| Mean time to failure (MTTF), subcomponent | 538 years, holding brake |
| Manufacturer | Festo |
| Hersteller-Nr | EMME-AS-60-S-LS-AMB |
| EAN | 4052568251000 |
| Zolltarifnummer | 85015100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Multiturn-Absolutwertgeber, mit Haltebremse |
| Norm | DIN EN 60034-1, DIN EN 60034 |
| Operating voltage | 360 V DC |
| Series | EMME |
| Protection rating | IP21 |
| Temperature (max.) | 40 |
Downloads
Accessories
Braking resistor 72 Ohm, 200 W nominal power CACR-LE2-72-W500 - Festo 1336611
Item FES-1336611Braking resistor 100 Ohm, 200 W nominal power CACR-LE2-100-W500 - Festo 1336615
Item FES-1336615Braking resistor 67 Ohm, 720 W nominal power CACR-KL2-67-W1800 - Festo 1336617
Item FES-1336617Braking resistor 33 Ohm, 1440 W nominal power CACR-KL2-33-W2400 - Festo 1336619
Item FES-1336619Memory card for motors and controllers CAMC-M-S-F10-V1 - Festo 1436343
Item FES-1436343Servo motor 190 W, 0.7 Nm standstill torque, multi-turn safety encoder EMME-AS-60-S-LS-AMX - Festo 4267572
Item FES-4267572Servo motor 190 W, 0.7 Nm standstill torque, holding brake, multi-turn safety encoder EMME-AS-60-S-LS-AMXB - Festo 4267573
Item FES-4267573Show 3 more items
Servo motor 190 W, 0.7 Nm standstill torque, holding brake, single-turn encoder EMME-AS-60-S-LS-ASB - Festo 2089700
Item FES-2089700Servo motor 190 W, 0.7 Nm standstill torque, single-turn encoder EMME-AS-60-S-LS-AS - Festo 2089698
Item FES-2089698Servo motor 190 W, 0.7 Nm standstill torque, multi-turn safety encoder EMME-AS-60-SK-LS-AMX - Festo 4267574
Item FES-4267574Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






