Images are examples, some edited with AI. The technical data are authoritative. AI notice
Semi-rotary drive with integrated angle encoder, G1/8, swivel angle 0 to 270° DSMI-40-270-A-B - Festo 561691
The DSMI-40-270-A-B semi-rotary drive with integrated angle encoder performs controlled swivel movements. Key data: port G1/8, swivel angle 0 to 270°, operating voltage 10 V DC and housing made of anodised wrought aluminium alloy.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The DSMI-40-270-A-B semi-rotary drive with integrated angle encoder performs controlled swivel movements. At a glance: port G1/8 and swivel angle 0 to 270°.
Benefits
- Operating pressure 4 to 8 bar
- Pneumatic port G1/8 for direct piping
- Swivel angle adjustable over 0 to 270°
- Angle resolution ≤ 0.1°
- Independent linearity 0.0025
- Positioning repeatability ± 0.3°
Application
It is used with an end position controller or axis controller for Soft Stop and positioning. The DSMI-40-270-A-B works with compressed air to ISO 8573-1:2010 [6:4:4].
Technical data
| Type | DSMI-40-270-A-B |
|---|---|
| Festo part number | 561691 |
| Swivel angle adjustment range | 0 to 270° |
| Stroke reduction in end positions | 5 ° |
| Smallest positioning stroke | 15° with Soft Stop, 5° with positioning |
| Piston diameter | 40 mm |
| Swivel angle | 0 to 272° |
| Cushioning | P: elastic cushioning rings/pads at both ends |
| Mounting position, positioning | any |
| Mounting position, Soft Stop | horizontal |
| Measuring principle, displacement encoder | analogue |
| Design | drive shaft with ball bearings, rotary vane |
| Position sensing | with integrated angle encoder, for proximity sensor |
| Operating pressure positioning/Soft Stop | 4 to 8 bar |
| Max. swivel frequency at 6 bar | 2 Hz |
| Max. travel speed | 2000 deg/s |
| Min. travel speed | 50 deg/s |
| Typical positioning time, short stroke, horizontal | 0.25/0.25 s |
| Typical positioning time, long stroke, horizontal | 0.3/0.55 s |
| Terminal resistance | 5 kOhm |
| Recommended wiper current | less than 1 µA |
| Mode of operation | double-acting |
| Max. operating voltage DC | 42 V |
| Max. wiper current, short-term | 10000 µA |
| Max. current consumption | 4 mA |
| Nominal operating voltage DC | 10 V |
| Terminal resistance tolerance | 20 % |
| Permissible voltage fluctuation | less than 1 % |
| CE marking (see declaration of conformity) | to EU EMC Directive |
| Operating medium | compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | lubricated operation not possible |
| Continuous shock resistance to DIN/IEC 68 part 2-82 | tested to severity level 2 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Degree of protection | IP65, to IEC 60529 |
| Vibration resistance to DIN/IEC 68 part 2-6 | tested to severity level 2 |
| Ambient temperature | -10 to 60 °C |
| Impact energy in end positions | 0.1 J |
| Max. axial force | 120 N |
| Max. mass moment of inertia, horizontal | 0.12 kg/m² |
| Max. mass moment of inertia, vertical | 0.12 kg/m² |
| Max. radial force | 350 N |
| Min. mass moment of inertia, horizontal | 0.006 kg/m² |
| Min. mass moment of inertia, vertical | 0.006 kg/m² |
| Theoretical torque at 6 bar | 20 Nm |
| Product weight | 3950 g |
| Angle resolution | ≤ 0.1° |
| Output signal | analogue |
| Independent linearity | 0.0025 |
| Repeatability, positioning | ± 0.3° |
| Repeatability, Soft Stop end position | less than 0.2° |
| Repeatability, Soft Stop intermediate position | ± 2° |
| Electrical connection, displacement encoder | 4-pin |
| Cable length | 30 m |
| Mounting type | with female thread |
| Pneumatic port | G1/8 |
| Measuring system housing material | wrought aluminium alloy, anodised |
| Note on materials | copper and PTFE-free |
| Stop lever material | wrought aluminium alloy, anodised |
| Drive shaft material | steel, nickel-plated |
| Fixed stop material | steel |
| Housing material | wrought aluminium alloy, anodised |
| Measuring system coupling material | TPE-U(PU) |
| Feather key material | steel |
| Rotary vane material | PET, reinforced |
| Plug housing material | PA, reinforced |
| Cylinder barrel material | wrought aluminium alloy |
| Weight | 4.1 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DSMI-40-270-A-B |
| EAN | 4052568208868 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Medium | Compressed air |
| Function | double-acting |
| Certification | IEC 60529 |
| Operating conditions | ISO 8573-1 |
| Operating voltage | 10 V DC |
| Bore (mm) | 40 |
| Pneumatic connection | G1/8 |
| Protection rating | IP65 |
| Temperaturbereich | -10-60 °C |
| Temperature (max.) | 60 |
Downloads
Accessories
Measured-value transducer for displacement encoders, 24 V DC, IP65 DADE-MVC-010 - Festo 542117
Item FES-542117Sensor interface for position sensing, 24 V DC, IP67 CASM-S-D3-R7 - Festo 558387
Item FES-558387Connecting cable with circular connectors, 0.3 m, IP65 NEBC-A1W3-K-0.3-N-M12G5 - Festo 549294
Item FES-549294Connecting cable with circular connectors, 0.3 m, IP65 NEBC-P1W4-K-0.3-N-M12G5 - Festo 549293
Item FES-549293Sensor interface for position sensing, 24 V DC, IP67 CASM-S-D2-R3 - Festo 549292
Item FES-549292Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




