Stopper cylinder with roller, single-acting pulling, Ø 50 mm, stroke 25 mm DFSP-Q-50-25-PR-PA - Festo 576166

With 50 mm piston diameter and 25 mm stroke, the DFSP stops workpiece carriers at defined positions, the extended piston rod withstands impact forces up to 5000 N. Single-acting, pulling: compressed air at 1.2 to 10 bar retracts the piston rod and releases the workpiece carrier, the spring handles the return.

Benefits

• Impact force on the extended piston rod up to 5000 N, lateral force during switching up to 1250 N
• Piston rod with roller made of galvanised steel, workpiece carriers roll off on release
• Non-rotating thanks to flattened piston rod, stroke 25 mm
• Cycle frequency up to 5 Hz, operating pressure 1.2 to 10 bar
• Piston rod in high-alloy stainless steel, CRC 2
• Position sensing via proximity switches, air connection G1/8

Applications

It is used wherever workpiece carriers are accumulated, separated or positioned at a machining station. The DFSP-Q-50-25-PR-PA can be installed in any position and operates at -10 to 80 °C.