Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, single-acting, spring return, size 80, flange F0507 DFPD-80-RP-90-RS30-F0507 - Festo 8047625

Festo ✓ Original product Brand new

Spring-return quarter turn actuator in size 80 for quarter-turn valves, mounted via flange F0507 to ISO 5211. The spring holds at least 14.8 Nm, with compressed air (3 bar) 15.7 to 30.1 Nm are available. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 High Demand. Weight 3.75 kg.

Net
€181.41
excl. VAT
Item FES-8047625
Manufacturer no. DFPD-80-RP-90-RS30-F0507

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

For on/off valves with a safety position: the DFPD-80-RP-90-RS30-F0507 is single-acting with spring return and reaches up to 30.1 Nm at 3 bar. Flange pattern F0507 to ISO 5211 and shaft connection T17, depth 19 mm fit directly onto the valve top.

Benefits

  • Air torque 15.7 to 30.1 Nm at 3 bar, spring return torque 14.8 to 29.2 Nm
  • Safety position by spring force if air supply fails, operating pressure 2 to 8 bar
  • Valve interface to ISO 5211: flange F0507, shaft connection T17
  • Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve, positioner and position sensor interface size AA 1
  • For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T4 Gb X
  • End position at 0° adjustable by -5 to 5°

Applications

Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F0507. Thanks to ATEX II 2G/2D, the size 80 DFPD may be used in zones 1 and 2 as well as zones 21 and 22. Medium: compressed air to ISO 8573-1:2010 [7:4:4], permitted 2 to 8 bar, rated at 3 bar. For sizing the valve bracket: product weight 3.75 kg.

Technical data

Order codeDFPD-80-RP-90-RS30-F0507
Festo part number8047625
Size of valve actuator80
Flange hole patternF0507
Swivel angle90°
End-position adjustment range at 0°-5 to 5°
End-position adjustment range at 90°-5 to 5°
Shaft connection depth19 mm
Fitting connection conforms to standardISO 5211
Mounting positionany
Mode of operationsingle-acting
Designrack and pinion
Closing directioncloses to the right
Valve connection conforms to standardVDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standardVDI/VDE 3845 size AA 1
Safety Integrity Level (SIL)product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure2 to 8 bar
Nominal operating pressure3 bar
CE mark (see declaration of conformity)to EU Explosion Protection Directive (ATEX)
Certificate issuing authorityTÜV Rheinland
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T4 Gb X
Explosion ignition protection type for dustEx h IIIC T105°C Db X
Explosion ambient temperature-20 to 80 °C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumlubricated operation possible (then required for further operation), pressure dew point 10°C below ambient or medium temperature
Storage temperature-20 to 60 °C
Ambient temperature-20 to 80 °C
Torque at nominal operating pressure and 0° swivel angle30.1 Nm
Torque at nominal operating pressure and 90° swivel angle15.7 Nm
Note on torqueThe operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°3.1 l
Product weight3746 g
Shaft connectionT17
Pneumatic connectionG1/8
Note on materialsRoHS compliant
Material connecting platewrought aluminium alloy, anodised
Material coverdie-cast aluminium, coated
Material sealsNBR
Material housingwrought aluminium alloy, anodised
Material pistondie-cast aluminium
Material bearingPOM
Material camcast stainless steel
Material screwshigh-alloy stainless steel
Material shaftsteel, nickel-plated
Spring return torque at 0° swivel angle14.8 Nm
Spring return torque at 90° swivel angle29.2 Nm
Material springspring steel
Weight3.9 kg
ManufacturerFesto
Hersteller-NrDFPD-80-RP-90-RS30-F0507
EAN4052568287436
Zolltarifnummer84123900
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
ThreadG 1/8
Seal materialNBR
MediumCompressed air
Functionsingle-acting
Actuation typepneumatic
NormISO 5211, VDI/VDE 3845
CertificationATEX
Operating conditionsISO 8573-1
SeriesDFPD
Betriebsdruck max [bar]8
Temperaturbereich-20-80 °C
Temperature (max.)80

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.