Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, single-acting, spring return, size 20, flange F03 DFPD-20-RP-90-RS60-F03-R3-EP - Festo 8047647

Festo ✓ Original product Brand new

Spring-return quarter turn actuator in size 20 for quarter-turn valves, mounted via flange F03 to ISO 5211. Air torque 7.6 to 14.7 Nm at 6 bar, spring return torque 7.2 to 14.3 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 High Demand. Weight 1.42 kg.

Net
€139.21
excl. VAT
Item FES-8047647
Manufacturer no. DFPD-20-RP-90-RS60-F03-R3-EP

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The single-acting DFPD in size 20 moves the valve with 7.6 to 14.7 Nm air torque at 6 bar and returns it by spring with 7.2 to 14.3 Nm. Flange pattern F03 to ISO 5211 and shaft connection T9, depth 10 mm fit directly onto the valve top.

Benefits

  • Air torque 7.6 to 14.7 Nm at 6 bar, spring return torque 7.2 to 14.3 Nm
  • Safety position by spring force if air supply fails, operating pressure 2 to 8 bar
  • Valve interface to ISO 5211: flange F03, shaft connection T9
  • Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve, positioner and position sensor interface size AA 1
  • For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T4 Gb X
  • Suitable for safety-related control systems (SRP/CS) up to SIL 2 High Demand

Applications

Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F03. The ATEX rating II 2G/2D allows the DFPD-20-RP-90-RS60-F03-R3-EP to be installed in zones 1 and 2 as well as zones 21 and 22. The DFPD-20-RP-90-RS60-F03-R3-EP runs on compressed air to ISO 8573-1:2010 [7:4:4] within 2 to 8 bar. For sizing the valve bracket: product weight 1.42 kg.

Technical data

Order codeDFPD-20-RP-90-RS60-F03-R3-EP
Festo part number8047647
Size of valve actuator20
Flange hole patternF03
Swivel angle90°
End-position adjustment range at 0°-5 to 5°
End-position adjustment range at 90°-5 to 5°
Shaft connection depth10 mm
Fitting connection conforms to standardISO 5211
Mounting positionany
Mode of operationsingle-acting
Designrack and pinion
Closing directioncloses to the right
Valve connection conforms to standardVDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standardVDI/VDE 3845 size AA 1
Safety Integrity Level (SIL)product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure2 to 8 bar
Nominal operating pressure6 bar
CE mark (see declaration of conformity)to EU Explosion Protection Directive (ATEX)
Certificate issuing authorityTÜV Rheinland
ATEX category gasII 2G
ATEX category dustII 2D
Explosion ignition protection type for gasEx h IIC T4 Gb X
Explosion ignition protection type for dustEx h IIIC T105°C Db X
Explosion ambient temperature-20 to 80 °C
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumlubricated operation possible (then required for further operation), pressure dew point 10°C below ambient or medium temperature
Storage temperature-20 to 60 °C
Ambient temperature-20 to 80 °C
Torque at nominal operating pressure and 0° swivel angle14.7 Nm
Torque at nominal operating pressure and 90° swivel angle7.6 Nm
Note on torqueThe operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°0.8 l
Product weight1419 g
Shaft connectionT9
Pneumatic connectionG1/8
Note on materialsRoHS compliant
Material connecting platewrought aluminium alloy, anodised
Material coverdie-cast aluminium, coated
Material sealsNBR
Material housingwrought aluminium alloy, anodised
Material pistondie-cast aluminium
Material bearingPOM
Material camcast stainless steel
Material screwshigh-alloy stainless steel
Material shafthigh-alloy stainless steel
Spring return torque at 0° swivel angle7.2 Nm
Spring return torque at 90° swivel angle14.3 Nm
Material springspring steel
Weight1.5 kg
ManufacturerFesto
Hersteller-NrDFPD-20-RP-90-RS60-F03-R3-EP
EAN4052568287580
Zolltarifnummer84123900
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
ThreadG 1/8
Seal materialNBR
MediumCompressed air
Functionsingle-acting
Actuation typepneumatic
NormISO 5211, VDI/VDE 3845
CertificationATEX
Operating conditionsISO 8573-1
SeriesDFPD
Betriebsdruck max [bar]8
Temperaturbereich-20-80 °C
Temperature (max.)80

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.