Semi-Rot. Drive DFPD-160-RP-90-RS60-F0710-R3-# - Festo 8048146

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, single-acting, spring return, size 160, flange F0710 DFPD-160-RP-90-RS60-F0710-R3 - Festo 8048146

Name: Quarter turn actuator, single-acting, spring return, size 160, flange F0710 DFPD-160-RP-90-RS60-F0710-R3 - Festo 8048146
Brand: Festo
SKU: FES-8048146
Price: 355.53 EUR
Availability: InStock

Festo ✓ Original product Brand new

DFPD quarter turn actuator, single-acting with spring set, size 160, flange pattern F0710 to ISO 5211. Air torque 61.4 to 117.9 Nm at 6 bar, spring return torque 57.7 to 114.2 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 High Demand. Weight 7.18 kg.

Net

€355.53

excl. VAT

Item FES-8048146

Manufacturer no. DFPD-160-RP-90-RS60-F0710-R3-#

Available

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

For on/off valves with a safety position: the DFPD-160-RP-90-RS60-F0710-R3 is single-acting with spring return and reaches up to 117.9 Nm at 6 bar. Mounting is via flange F0710 (ISO 5211) and shaft connection T22, depth 24 mm.

Benefits

61.4 to 117.9 Nm with compressed air (6 bar) and 57.7 to 114.2 Nm from the spring set
Safety position by spring force if air supply fails, operating pressure 2 to 8 bar
Valve interface to ISO 5211: flange F0710, shaft connection T22
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve, positioner and position sensor interface size AA 1
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T4 Gb X
Air consumption 5.9 l per switching cycle at 6 bar

Applications

The DFPD is intended for quarter-turn valves with top flange F0710, such as ball valves and butterfly valves in process plants. The ATEX rating II 2G/2D allows the DFPD-160-RP-90-RS60-F0710-R3 to be installed in zones 1 and 2 as well as zones 21 and 22. The DFPD-160-RP-90-RS60-F0710-R3 runs on compressed air to ISO 8573-1:2010 [7:4:4] within 2 to 8 bar. The product weight is 7.18 kg.

Technical data

Order code	DFPD-160-RP-90-RS60-F0710-R3
Festo part number	8048146
Size of valve actuator	160
Flange hole pattern	F0710
Swivel angle	90°
End-position adjustment range at 0°	-5 to 5°
End-position adjustment range at 90°	-5 to 5°
Shaft connection depth	24 mm
Fitting connection conforms to standard	ISO 5211
Mounting position	any
Mode of operation	single-acting
Design	rack and pinion
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standard	VDI/VDE 3845 size AA 1
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	2 to 8 bar
Nominal operating pressure	6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
Certificate issuing authority	TÜV Rheinland
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T4 Gb X
Explosion ignition protection type for dust	Ex h IIIC T105°C Db X
Explosion ambient temperature	-20 to 80 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation), pressure dew point 10°C below ambient or medium temperature
Storage temperature	-20 to 60 °C
Ambient temperature	-20 to 80 °C
Torque at nominal operating pressure and 0° swivel angle	117.9 Nm
Torque at nominal operating pressure and 90° swivel angle	61.4 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	5.9 l
Product weight	7179 g
Shaft connection	T22
Pneumatic connection	G1/4
Note on materials	RoHS compliant
Material connecting plate	wrought aluminium alloy, anodised
Material cover	die-cast aluminium, coated
Material seals	NBR
Material housing	wrought aluminium alloy, anodised
Material piston	die-cast aluminium
Material bearing	POM
Material cam	cast stainless steel
Material screws	high-alloy stainless steel
Material shaft	high-alloy stainless steel
Spring return torque at 0° swivel angle	57.7 Nm
Spring return torque at 90° swivel angle	114.2 Nm
Material spring	spring steel
Weight	7 kg
Manufacturer	Festo
Hersteller-Nr	DFPD-160-RP-90-RS60-F0710-R3-#
EAN	4052568288129
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/4
Seal material	NBR
Medium	Compressed air
Function	single-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DFPD
Betriebsdruck max [bar]	8
Temperaturbereich	-20-80 °C
Temperature (max.)	80