Semi-Rotary Drive DAPS-0480-090-RS4-F1012-T4 - Festo 8030623

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, single-acting, spring return, size 0480, flange F10/F12 DAPS-0480-090-RS4-F1012-T4 - Festo 8030623

Name: Quarter turn actuator, single-acting, spring return, size 0480, flange F10/F12 DAPS-0480-090-RS4-F1012-T4 - Festo 8030623
Brand: Festo
SKU: FES-8030623
Price: 1720.65 EUR
Availability: InStock

Festo ✓ Original product Brand new

Spring-return quarter turn actuator in size 0480 for quarter-turn valves, mounted via flange F10/F12 to ISO 5211. At nominal operating pressure the air stroke delivers 240 to 480 Nm, the spring returns with 240 to 480 Nm. Weight 22.7 kg.

Net

€1,720.65

excl. VAT

Item FES-8030623

Manufacturer no. DAPS-0480-090-RS4-F1012-T4

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

The single-acting DAPS in size 0480 moves the valve with 240 to 480 Nm air torque at nominal operating pressure and returns it by spring with 240 to 480 Nm. Mounting is via flange F10/F12 (ISO 5211) and shaft connection T36, depth 38.5 mm.

Benefits

240 to 480 Nm with compressed air at nominal operating pressure and 240 to 480 Nm from the spring set
Safety position by spring force if air supply fails, operating pressure 5.6 to 8.4 bar
Valve interface to ISO 5211: flange F10/F12, shaft connection T36
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
Corrosion resistance class CRC 3

Applications

Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F10/F12. For hazardous areas: the actuator with flange F10/F12 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The size 0480 DAPS is supplied with compressed air to ISO 8573-1:2010 [7:4:4] within 5.6 to 8.4 bar. For sizing the valve bracket: product weight 22.7 kg.

Technical data

Order code	DAPS-0480-090-RS4-F1012-T4
Festo part number	8030623
Size of valve actuator	0480
Flange hole pattern	F10, F12
Swivel angle	90°
End-position adjustment range at 0°	-1 to 9°
Shaft connection depth	38.5 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	single-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	5.6 to 8.4 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-20 to 150 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	3 - high corrosion stress
Ambient temperature	-20 to 150 °C
Torque at nominal operating pressure and 0° swivel angle	480 Nm
Torque at nominal operating pressure and 50° swivel angle	240 Nm
Torque at nominal operating pressure and 90° swivel angle	320 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	19.6 l
Product weight	22700 g
Shaft connection	T36
Pneumatic connection	G1/4
Note on materials	contains paint-wetting impairment substances (PWIS), RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FKM, PTFE-reinforced
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
End-position adjustment range at 90°	81 to 91°
Note on end-position adjustment	one end position adjustable as required
Supply pressure for spring set	5.6 bar
Spring return torque at 0° swivel angle	320 Nm
Spring return torque at 50° swivel angle	240 Nm
Spring return torque at 90° swivel angle	480 Nm
Spring set	4
Weight	23 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-0480-090-RS4-F1012-T4
EAN	4052568280833
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/4
Seal material	FKM, PTFE-reinforced
Medium	Compressed air
Function	single-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperaturbereich	-20-150 °C
Temperature (max.)	150