Semi-Rotary Drive DAPS-0240-090-RS2-F1012-MW - Festo 8005043

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, single-acting, spring return, size 0240, flange F10/F12 DAPS-0240-090-RS2-F1012-MW - Festo 8005043

Name: Quarter turn actuator, single-acting, spring return, size 0240, flange F10/F12 DAPS-0240-090-RS2-F1012-MW - Festo 8005043
Brand: Festo
SKU: FES-8005043
Price: 1459.39 EUR
Availability: InStock

Festo ✓ Original product Brand new

DAPS quarter turn actuator, single-acting with spring set, size 0240, flange pattern F10/F12 to ISO 5211. At 5.6 bar nominal pressure the air stroke delivers 165 to 300 Nm, the spring returns with 75 to 150 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2.

Net

€1,459.39

excl. VAT

Item FES-8005043

Manufacturer no. DAPS-0240-090-RS2-F1012-MW

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

For on/off valves with a safety position: the DAPS-0240-090-RS2-F1012-MW is single-acting with spring return and reaches up to 300 Nm at 5.6 bar. Flange pattern F10/F12 to ISO 5211 and shaft connection T27, depth 29.5 mm fit directly onto the valve top.

Benefits

165 to 300 Nm with compressed air (5.6 bar) and 75 to 150 Nm from the spring set
Safety position by spring force if air supply fails, operating pressure 3.5 to 8.4 bar
Valve interface to ISO 5211: flange F10/F12, shaft connection T27
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand

Applications

The DAPS is intended for quarter-turn valves with top flange F10/F12, such as ball valves and butterfly valves in process plants. The ATEX rating II 2G/2D allows the DAPS-0240-090-RS2-F1012-MW to be installed in zones 1 and 2 as well as zones 21 and 22. Medium: compressed air to ISO 8573-1:2010 [7:4:4], permitted 3.5 to 8.4 bar, rated at 5.6 bar. For sizing the valve bracket: product weight 15.2 kg.

Technical data

Order code	DAPS-0240-090-RS2-F1012-MW
Festo part number	8005043
Size of valve actuator	0240
Flange hole pattern	F10, F12
Swivel angle	92°
Shaft connection depth	29.5 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	single-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	3.5 to 8.4 bar
Nominal operating pressure	5.6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-50 to 60 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	2 - moderate corrosion stress
Ambient temperature	-20 to 80 °C
Torque at nominal operating pressure and 0° swivel angle	300 Nm
Torque at nominal operating pressure and 50° swivel angle	165 Nm
Torque at nominal operating pressure and 90° swivel angle	250 Nm
Air consumption at 6 bar per cycle 0°-90°-0°	10.5 l
Product weight	15200 g
Shaft connection	T27
Pneumatic connection	G1/4
Note on materials	RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FKM, NBR, PUR
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
Note on end-position adjustment	one end position adjustable as required
Supply pressure for spring set	3.5 bar
Spring return torque at 0° swivel angle	100 Nm
Spring return torque at 50° swivel angle	75 Nm
Spring return torque at 90° swivel angle	150 Nm
Spring set	2
Weight	15 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-0240-090-RS2-F1012-MW
EAN	4052568256920
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/4
Seal material	FKM, NBR, PUR
Medium	Compressed air
Function	single-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperaturbereich	-20-80 °C
Temperature (max.)	80