Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS3-F0710-MW - Festo 8005040
Spring-return quarter turn actuator in size 0180 for quarter-turn valves, mounted via flange F07/F10 to ISO 5211. Air torque 112.5 to 210 Nm at 5.6 bar, spring return torque 67.5 to 135 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2. Weight 11.7 kg.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
If the compressed air fails, the spring set of the DAPS-0180-090-RS3-F0710-MW turns the valve into the defined position with at least 67.5 Nm spring torque. Mounting is via flange F07/F10 (ISO 5211) and shaft connection T22, depth 24.3 mm.
Benefits
- 112.5 to 210 Nm with compressed air (5.6 bar) and 67.5 to 135 Nm from the spring set
- Safety position by spring force if air supply fails, operating pressure 4.2 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Corrosion resistance class CRC 2
Applications
The DAPS is intended for quarter-turn valves with top flange F07/F10, such as ball valves and butterfly valves in process plants. Thanks to ATEX II 2G/2D, the size 0180 DAPS may be used in zones 1 and 2 as well as zones 21 and 22. The DAPS-0180-090-RS3-F0710-MW runs on compressed air to ISO 8573-1:2010 [7:4:4] within 4.2 to 8.4 bar. The product weight is 11.7 kg.
Technical data
| Order code | DAPS-0180-090-RS3-F0710-MW |
|---|---|
| Festo part number | 8005040 |
| Size of valve actuator | 0180 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 92° |
| Shaft connection depth | 24.3 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 4.2 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -20 to 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 210 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 112.5 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 165 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 7 l |
| Product weight | 11700 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FKM, NBR, PUR |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 4.2 bar |
| Spring return torque at 0° swivel angle | 90 Nm |
| Spring return torque at 50° swivel angle | 67.5 Nm |
| Spring return torque at 90° swivel angle | 135 Nm |
| Spring set | 3 |
| Weight | 15 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0180-090-RS3-F0710-MW |
| EAN | 4052568256890 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FKM, NBR, PUR |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperaturbereich | -20-80 °C |
| Temperature (max.) | 80 |
Downloads
Accessories
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0180-090-RS3-F0710 - Festo 533449
Item FES-533449
Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS2-F0710-MW - Festo 8005039
Item FES-8005039Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS4-F0710-MW - Festo 8005041
Item FES-8005041Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS1-F0710-MW - Festo 8005038
Item FES-8005038Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS4-F0710-T4 - Festo 8030620
Item FES-8030620Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.