Festo
Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS2-F0710-MW - Festo 8005039
Item FES-8005039
€1,274.76
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, single-acting, spring return, size 0180, flange F07/F10 DAPS-0180-090-RS2-F0710-T6 - Festo 553198
DAPS quarter turn actuator, single-acting with spring set, size 0180, flange pattern F07/F10 to ISO 5211. At 5.6 bar nominal pressure the air stroke delivers 123.8 to 225 Nm, the spring returns with 56.3 to 112.5 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3.
Net
excl. VAT
€851.67
Item
FES-553198
Manufacturer no.
DAPS-0180-090-RS2-F0710-T6
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For on/off valves with a safety position: the DAPS-0180-090-RS2-F0710-T6 is single-acting with spring return and reaches up to 225 Nm at 5.6 bar. Mounting is via flange F07/F10 (ISO 5211) and shaft connection T22, depth 24.3 mm.
Benefits
- Air torque 123.8 to 225 Nm at 5.6 bar, spring return torque 56.3 to 112.5 Nm
- Safety position by spring force if air supply fails, operating pressure 3.5 to 8.4 bar
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- End position at 0° adjustable by -1 to 9°
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F07/F10. For hazardous areas: the actuator with flange F07/F10 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The size 0180 DAPS is supplied with compressed air to ISO 8573-1:2010 [7:4:4] within 3.5 to 8.4 bar. The product weight is 8.9 kg.
Technical data
| Order code | DAPS-0180-090-RS2-F0710-T6 |
|---|---|
| Festo part number | 553198 |
| Size of valve actuator | 0180 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 90° |
| End-position adjustment range at 0° | -1 to 9° |
| Shaft connection depth | 24.3 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | single-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 3.5 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 3 - high corrosion stress |
| Ambient temperature | -50 to 60 °C |
| Torque at nominal operating pressure and 0° swivel angle | 225 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 123.8 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 187.5 Nm |
| Note on torque | The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling |
| Air consumption at 6 bar per cycle 0°-90°-0° | 7 l |
| Product weight | 8900 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | contains paint-wetting impairment substances (PWIS), RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FVMQ, PTFE-reinforced |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| End-position adjustment range at 90° | 81 to 91° |
| Note on end-position adjustment | one end position adjustable as required |
| Supply pressure for spring set | 3.5 bar |
| Spring return torque at 0° swivel angle | 75 Nm |
| Spring return torque at 50° swivel angle | 56.3 Nm |
| Spring return torque at 90° swivel angle | 112.5 Nm |
| Spring set | 2 |
| Weight | 9 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0180-090-RS2-F0710-T6 |
| EAN | 4052568195762 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FVMQ, PTFE-reinforced |
| Medium | Compressed air |
| Function | single-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperature (max.) | 60 |
Downloads
Accessories
Festo
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0180-090-RS2-F0710 - Festo 533448
Item FES-533448
€760.96
Festo
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0180-090-RS4-F0710 - Festo 533450
Item FES-533450
€760.96
Festo
Quarter-turn actuator, single-acting, spring return, flange F07/F10, ATEX DAPS-0180-090-RS3-F0710 - Festo 533449
Item FES-533449
€760.96
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.