Semi-Rotary Drive DAPS-0015-090-RS4-F0305-T6 - Festo 553229

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, single-acting, spring return, size 0015, flange F03/F05 DAPS-0015-090-RS4-F0305-T6 - Festo 553229

Name: Quarter turn actuator, single-acting, spring return, size 0015, flange F03/F05 DAPS-0015-090-RS4-F0305-T6 - Festo 553229
Brand: Festo
SKU: FES-553229
Price: 250.34 EUR
Availability: InStock

Festo ✓ Original product Brand new

Spring-return quarter turn actuator in size 0015 for quarter-turn valves, mounted via flange F03/F05 to ISO 5211. The spring holds at least 7.5 Nm, with compressed air (5.6 bar) 7.5 to 15 Nm are available. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3.

Net

€250.34

excl. VAT

Item FES-553229

Manufacturer no. DAPS-0015-090-RS4-F0305-T6

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

For on/off valves with a safety position: the DAPS-0015-090-RS4-F0305-T6 is single-acting with spring return and reaches up to 15 Nm at 5.6 bar. Flange pattern F03/F05 to ISO 5211 and shaft connection T11, depth 13.2 mm fit directly onto the valve top.

Benefits

7.5 to 15 Nm with compressed air (5.6 bar) and 7.5 to 15 Nm from the spring set
Safety position by spring force if air supply fails, operating pressure 5.6 to 8.4 bar
Valve interface to ISO 5211: flange F03/F05, shaft connection T11
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
End position at 0° adjustable by -1 to 9°

Applications

It operates 90-degree valves with top flange F03/F05, for example ball valves or butterfly valves in pipelines. The ATEX rating II 2G/2D allows the DAPS-0015-090-RS4-F0305-T6 to be installed in zones 1 and 2 as well as zones 21 and 22. The DAPS-0015-090-RS4-F0305-T6 runs on compressed air to ISO 8573-1:2010 [7:4:4] within 5.6 to 8.4 bar. For sizing the valve bracket: product weight 1.2 kg.

Technical data

Order code	DAPS-0015-090-RS4-F0305-T6
Festo part number	553229
Size of valve actuator	0015
Flange hole pattern	F03, F05
Swivel angle	90°
End-position adjustment range at 0°	-1 to 9°
Shaft connection depth	13.2 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	single-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	5.6 to 8.4 bar
Nominal operating pressure	5.6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-50 to 60 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	3 - high corrosion stress
Ambient temperature	-50 to 60 °C
Torque at nominal operating pressure and 0° swivel angle	15 Nm
Torque at nominal operating pressure and 50° swivel angle	7.5 Nm
Torque at nominal operating pressure and 90° swivel angle	10 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	0.63 l
Product weight	1200 g
Shaft connection	T11
Pneumatic connection	G1/8
Note on materials	contains paint-wetting impairment substances (PWIS), RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FVMQ, PTFE-reinforced
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
End-position adjustment range at 90°	81 to 91°
Note on end-position adjustment	one end position adjustable as required
Supply pressure for spring set	5.6 bar
Spring return torque at 0° swivel angle	10 Nm
Spring return torque at 50° swivel angle	7.5 Nm
Spring return torque at 90° swivel angle	15 Nm
Spring set	4
Weight	1.3 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-0015-090-RS4-F0305-T6
EAN	4052568196066
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/8
Seal material	FVMQ, PTFE-reinforced
Medium	Compressed air
Function	single-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperature (max.)	60