Quarter turn actuator, double-acting, 15 Nm, size 0015, flange F04 DAPS-0015-090-R-F04-T4 - Festo 8030600

The double-acting DAPS-0015-090-R-F04-T4 turns process valves in both directions with compressed air and delivers 7.5 to 15 Nm at 5.6 bar. It mounts via the F04 hole pattern to ISO 5211, the T11 shaft, depth 13.2 mm engages the valve stem.

Benefits

• 7.5 to 15 Nm torque across the 90° swivel angle at 5.6 bar
• Valve interface to ISO 5211: flange F04, shaft connection T11
• Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
• For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
• End position at 0° adjustable by -1 to 9°
• Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand

Applications

The DAPS is intended for quarter-turn valves with top flange F04, such as ball valves and butterfly valves in process plants. The ATEX rating II 2G/2D allows the DAPS-0015-090-R-F04-T4 to be installed in zones 1 and 2 as well as zones 21 and 22. The DAPS-0015-090-R-F04-T4 runs on compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar. For sizing the valve bracket: product weight 0.75 kg.