Images are examples, some edited with AI. The technical data are authoritative. AI notice

Bus node DeviceNet IP65/IP67 for CPX terminal CPX-FB11 - Festo 526172

Festo ✓ Original product Brand new

The bus node CPX-FB11 from Festo handles communication between terminal and controller. Important for selection: protocol DeviceNet, baud rate 125, 250, 500 kBit/s and address volume 64 Byte inputs and 64 Byte outputs.

Net
€362.95
excl. VAT
Item FES-526172
Manufacturer no. CPX-FB11
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The bus node CPX-FB11 handles communication between terminal and controller. Important for selection: protocol DeviceNet, baud rate 125, 250, 500 kBit/s and address volume 64 Byte inputs and 64 Byte outputs.

Benefits

  • Protocol DeviceNet
  • Baud rate 125, 250, 500 kBit/s
  • Address volume 64 Byte inputs and 64 Byte outputs
  • Nominal operating voltage 24 V DC for control from standard controllers
  • Degree of protection IP65/IP67, dust-tight and protected against temporary immersion
  • Dimensions W x L x H 50 mm x 107 mm x 50 mm

Application

CPX-FB11 allows valve terminals and I/Os to be controlled via a single line. A typical use of CPX-FB11 is in networked machines with decentralised peripherals.

Technical data

Order codeCPX-FB11
Festo part number526172
Dimensions (W x L x H)50 mm x 107 mm x 50 mm, (Incl. linking block)
ParameterisationSystem parameters, Fail-safe response, Diagnostic behaviour, Forcing of channels, Idle mode behaviour, Signal setup
Additional functionsQuick connect, Start-up parameterisation in text via field bus, System status can be shown from process dat, Additional diagnosis interface for control panel, - Acyclical data access via "Explicit message", Channel related diagnosis via fieldbus
Operator controlsDIL switch
Operational voltage range DC18 to 30 V
Internal current consumption, operating voltageType 200 mA
Nominal operating voltage DC24 V
Corrosion resistance class CRC1 - Low corrosion stress
Storage temperature-20 to 70 °C
Degree of protectionIP65, IP67
Ambient temperature-5 to 50 °C
Product weight120.0 g
Max. address volume outputs64 Byte
Max. address volume inputs64 Byte
ProtocolDeviceNet
Material housingPC, PA reinforced
Field bus interfaceSocket Sub-D, 9 pin, Sub-D plug can be populated, MicroStyle: 2x M12x1, 5 pin, OpenStyle: Terminal strip 5-pin
Device-specific diagnosticsUndervoltage modules, Diagnostic memory, Channel and module-oriented diagnostics
Configuration supportEDS file
Baud rate125, 250, 500 kBit/s
LED display, bus-specificIO: I/O status, MS: Module status, NS: Network status
LED display, product-specificPL: Load supply, SF: System error, M: Modify, parameterisation, PS: Electronics supply, sensor supply
Types of communicationChange of State, Cyclic, Explicit message, Polled I/O, Strobbed I/O
Weight0.195 kg
ManufacturerFesto
Hersteller-NrCPX-FB11
EAN4052568006730
Zolltarifnummer85176200
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialPolyamide (PA)
Operating voltage24 V DC
SeriesCPX
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.